Class 99 & 99K Sewing Machines - Sew-Classic.com

More documents

Recommendations

Info

Class 99 & 99K Fig. 33 Removing the Bobbin Case Hold the bobbin case between the forefinger and the thumb of the left hand as shown in Fig. 33. Tilt the bobbin case to the left and at the same time slightly turn the right or forked end toward you so that it is moved out of engagement with the sewing hook. Then tilt the bobbin case toward the right and remove it. To Replace Bobbin Case Operator Being at the Front of the Machine. See that the needle is raised to its highest position and that the latch CC, Fig. 34 is raised from the slot FF, Fig. 34 and moved toward you Hold the bobbin case between the forefinger and thumb of the left hand, as shown in Fig. 33. Insert the forked end of the bobbin case under the throat plate so that the fork straddles the end of the bobbin case position bracket GG, Fig. 34. Then, with a slight twisting motion of the bobbin case to the left and to the back, lightly press it downward Fig. 34 Bobbin Case Position Bracket until the edge of the sewing hook engages in the groove under the rim of the bobbin case. Having set the bobbin case into the correct position, lock the latch CC, Fig. 34 in the notch FF, Fig. 34 to hold the bobbin case in place. Page 28 Table of Contents | Previous Page | Next Page
Class 99 & 99K To Replace Slide Plate Replace the slide plate from the right, as shown in Fig. 35, being careful to see that the two ends of the spring BB enter the grooves on the underside of the slide plate. Belt for Treadle Machine (99K29) SEWING SUGGESTIONS Fig. 35 Replacing Slide Plate The Belt should be only just tight enough not to slip. If too loose, shorten and rejoin. Breaking of Needles Might be Caused by: 1. Improper size of needle for thread and material -- see page 11. 2. Bent needle. 3. Pulling material when stitching. 4. Needle striking an improperly fastened presser foot. 5. Crossing too thick seams with too small a needle. Page 29 Table of Contents | Previous Page | Next Page
Page 1 and 2: Class 99 & 99K Sewing Machines Inst
Page 3 and 4: Class 99 & 99K ELECTRICAL INFORMATI
Page 5 and 6: Class 99 & 99K If the Machine is El
Page 7 and 8: Class 99 & 99K If the Machine is Tr
Page 9 and 10: Class 99 & 99K To Oil the Machine a
Page 11 and 12: Class 99 & 99K Needles and Thread F
Page 13 and 14: Class 99 & 99K UPPER THREADING See
Page 15 and 16: Class 99 & 99K To Wind the Bobbin H
Page 17 and 18: Class 99 & 99K To Replace the Bobbi
Page 19 and 20: Class 99 & 99K To Start Sewing Be s
Page 21 and 22: Class 99 & 99K To Regulate Length o
Page 23 and 24: Class 99 & 99K To Regulate Needle T
Page 25 and 26: To Adjust the Needle Thread Tension
Page 27: Class 99 & 99K Insert the forefinge
Page 31 and 32: Class 99 & 99K Page 31 Table of Con
Page 33 and 34: Class 99 & 99K Hemming (cont') ●
Page 35 and 36: Class 99 & 99K THE BINDER The binde
Page 37 and 38: Class 99 & 99K Binding Curved Edges
Page 39 and 40: Class 99 & 99K THE RUFFLER Occasion
Page 41 and 42: Class 99 & 99K Gathering (cont')
Page 43 and 44: Class 99 & 99K THE SEAM GUIDE The s
Page 45 and 46: Class 99 & 99K Skirt Zipper ● Mac
Page 47 and 48: Class 99 & 99K Corded Seams The cor
Page 49 and 50: Class 99 & 99K THE BIAS GAUGE The B
Page 51 and 52: Class 99 & 99K Joining Lace and Ins
Page 53 and 54: Class 99 & 99K THE ADJUSTABLE HEMME
Page 55 and 56: Class 99 & 99K DARNING OR EMBROIDER

Class 99 & 99K Sewing Machines - Sew-Classic.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?