Class 99 & 99K Sewing Machines - Sew-Classic.com

More documents

Recommendations

Info

Class 99 & 99K Protection Against Rust Damage Lint and fluff, if not removed prior to storage will, during humid periods, absorb and hold moisture, and thus accelerate rust damage to highly polished thread handling and other exposed parts. The extend of rust damage would depend upon the length of time the machine remained in idle storage where there is no ventilation. Sudden drops in temperature till cause moisture to form on parts which, if not protected by a film of oil, would rust and damage while in storage. Proper storage care suggests thorough brush-cleaning to remove all traces of lint and fluff, followed by swabbing of all the exposed parts in Figs. 10 and 11 with a lint-free brush saturated with SINGER oil. SINGER lint-free brush may be purchased at your local SINGER dealer. Page 8 Table of Contents | Previous Page | Next Page
Class 99 & 99K To Oil the Machine and Stand If the machine is used continuously, it should be oiled daily. If moderately used, an occasional oiling is sufficient. Apply one drop of oil at teach of the places indicated by the unlettered arrows in Figs. 9, 10 and 12 and carefully clean the machine to insure smooth and satisfactory performance. Oil holes are provided in the machine for bearings which cannot be directly reached. Remove face plate D, Fig. 9 by taking out screw C and loosening screw E near the top of the place. Slip plate over screw E. Oil the points indicated in Fig 10 and then replace face plate D. Draw the slide to the left (as shown in Fig. 9) and, after removing the lint and dust which may have accumulated (see instructions on page 24), apply a drop of oil at the place indicated at F, Fig. 11. The slide should then be closed. Page 9 Table of Contents | Previous Page | Next Page
Page 1 and 2: Class 99 & 99K Sewing Machines Inst
Page 3 and 4: Class 99 & 99K ELECTRICAL INFORMATI
Page 5 and 6: Class 99 & 99K If the Machine is El
Page 7: Class 99 & 99K If the Machine is Tr
Page 11 and 12: Class 99 & 99K Needles and Thread F
Page 13 and 14: Class 99 & 99K UPPER THREADING See
Page 15 and 16: Class 99 & 99K To Wind the Bobbin H
Page 17 and 18: Class 99 & 99K To Replace the Bobbi
Page 19 and 20: Class 99 & 99K To Start Sewing Be s
Page 21 and 22: Class 99 & 99K To Regulate Length o
Page 23 and 24: Class 99 & 99K To Regulate Needle T
Page 25 and 26: To Adjust the Needle Thread Tension
Page 27 and 28: Class 99 & 99K Insert the forefinge
Page 29 and 30: Class 99 & 99K To Replace Slide Pla
Page 31 and 32: Class 99 & 99K Page 31 Table of Con
Page 33 and 34: Class 99 & 99K Hemming (cont') ●
Page 35 and 36: Class 99 & 99K THE BINDER The binde
Page 37 and 38: Class 99 & 99K Binding Curved Edges
Page 39 and 40: Class 99 & 99K THE RUFFLER Occasion
Page 41 and 42: Class 99 & 99K Gathering (cont')
Page 43 and 44: Class 99 & 99K THE SEAM GUIDE The s
Page 45 and 46: Class 99 & 99K Skirt Zipper ● Mac
Page 47 and 48: Class 99 & 99K Corded Seams The cor
Page 49 and 50: Class 99 & 99K THE BIAS GAUGE The B
Page 51 and 52: Class 99 & 99K Joining Lace and Ins
Page 53 and 54: Class 99 & 99K THE ADJUSTABLE HEMME
Page 55 and 56: Class 99 & 99K DARNING OR EMBROIDER

Class 99 & 99K Sewing Machines - Sew-Classic.com

Create successful ePaper yourself

Delete template?

Save as template?