Class 99 & 99K Sewing Machines - Sew-Classic.com
Class 99 & 99K Sewing Machines - Sew-Classic.com
Class 99 & 99K Sewing Machines - Sew-Classic.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Class</strong> <strong>99</strong> & <strong>99</strong>K<br />
THE BIAS GAUGE<br />
The Bias Gauge is very useful<br />
(especially in the case of soft materials)<br />
when cutting bias strips from 7/16 inch<br />
to 1-3/8 inches in width. This is done<br />
by placing the bias gauge upon the<br />
point of the scissors and setting the<br />
blued indicator to the width desired.<br />
The line F is the point at which to set<br />
the blued indicator for facings, the line<br />
B for bindings, and the line C for<br />
cording or piping.<br />
Insert The material in the gauge with<br />
the edge against the blued indicator,<br />
and hold as shown at right.<br />
Bias binding should be cut 15/16 inch<br />
wide, and to do this the indicator should<br />
be set midway between the lines F and<br />
B.<br />
Page 49<br />
Table of Contents | Previous Page | Next Page
Change language