It's electric. - Bachmann

\
Coni cover / Built in frame
CONI COVER built-in frames are available in short and long versions. The R5
corner radius facilitates flush mounting in desks or tables. The built-in depth of
24 mm is suitable for a minimum desk or table top thickness of 16 mm. Fixing
to the tabletop is with 4 screws. These are screwed on from the inside through
corresponding holes on the long sides of the built-in frame. Fitting instructions
and cut-out dimensions are supplied with the unit.
CONI COVER built-in frame short
Outer dimensions: 248 x 149 mm
CONI COVER built-in frame long
Outer dimensions: 387 x 149 mm
Desk connection panels
Art. no.
Version
CONI COVER short
338.0081 ∙ Sheet steel silver-grey RAL9006 (similar)
CONI COVER long
338.0080 ∙ Sheet steel silver-grey RAL9006 (similar)
silver-grey
silver-grey
CONI COVER short
911.500 ∙ Satin white RAL9010
CONI COVER long
911.501 ∙ Satin white RAL9010
satin white
satin white
CONI COVER short
911.502 ∙ Black RAL9005
CONI COVER long
911.503 ∙ Black RAL9005
Black
Black
CONI COVER and STEP.
The expandable combination.
The modular design of the STEP power strips puts everything
you need for your specific, customised supply of power and data
at your fingertips. CONI COVER with its integrated brush insert
provide access that is both fast and elegant.
For STEP see from page 48.
Easy access to all power supply units located under the
table or desk top – for example to modular STEP power
strips.
You will find STEP on page 48.
bachmann.com
27