It's electric. - Bachmann

Facility Systems
Power Frame / Built-in frame / Power strips
POWER FRAME –
the practical unit for rapid installation.
Ease of integration
The POWER FRAME built-in frame with easy-tointegrate
power strip is designed as a simple and
easily accessible unit for supplying electricity to
workstations. The built-in frame can be installed
in desk or table tops with a minimum thickness
of 10 mm. Two standard 3 mm woodscrews are
used to fix the unit.
The built-in depth of the frame itself is approx.
34 mm. Including the power strip and cable
sockets (power and data), the total required builtin
depth is approx. 70 mm. The power and data
sockets are located on the rear of the power strip
profile.
Power strip simply clicks into place
The power strip clicks into the built-in frame (no
tools are required). Since the power strip can be
interchanged at any time, the user is guaranteed
long-term flexibility and adaptability to future
requirements.
Mounts with screws
This illustration shows how the frame is screwed
into the table/desk top.
Built in frame
Built-in depth:
approx. 35.5 mm
For desk or table top thickness: min. 10 mm
Outer dimensions:
241 x 73 mm
R5 corner radius:
facilitates flush mounting in or on the top of desks or tables.
Art. no.
Version
POWER FRAME
317.000 ∙ Silver-grey similar to RAL9006
silver-grey
POWER FRAME
317.001 ∙ Stainless steel
stainless steel
POWER FRAME
915.000 ∙ Black RAL9005
Black
POWER FRAME
915.001 ∙ White RAL9016
White
\
34 bachmann.com