Owner Manual - AVR 158 (English EU) - Harman Kardon

AVR 158
Appendix – Default settings, worksheets, remote product codes
Table A1 – Recommended Source Component Connections
26
Device Type AVR Source Audio Connections Video Connections
cable tV, Satellite, hdtV or other device that
delivers television programs
Table A2 – Source Setting Defaults
Source DVD HDMI 1 HDMI 2 HDMI 3 Video 1 Video 2 Aux 1 Aux 2 CD Tape Tuner TV
title tuner
Audio Input coAx 1 hdMI hdMI hdMI AnAlogue optIcAl 1 AnAlogue AnAlogue AnAlogue AnAlogue Int. tuner optIcAl 1
Auto poll on oFF oFF oFF oFF on oFF oFF oFF on – – oFF
Surround Mode
logIc 7
MoVIe
logIc 7
MoVIe
logIc 7
MoVIe
Video 1 • Video 1 Analogue inputs
logIc 7
MoVIe
• optical 1 Input (if not in use with hdMI 3
Vcr, dVr, pVr, or other audio/video recorder Video 2 • Video 2 Analogue (inputs and outputs)
dVd player, blu-ray disc player dVd or hdMI
(for blu-ray disc)
hdMI-capable disc player, game console or
other audio/video device
hdMI-capable disc player, game console or
other audio/video device
hdMI-capable disc player, game console or
other audio/video device
• Any one available coaxial or optical digital audio
input with corresponding coax digital output
• dVd Analogue Inputs
• coax 1 Input
logIc 7
MoVIe
logIc 7
MoVIe
logIc 7
MoVIe
logIc 7
MoVIe
composite Video 1 Input
• composite Video 2 Input
• For recording, use composite Video 2 output
• dVd component Video Input
hdMI 1 • hdMI 1 Input
• hdMI 1 Input
hdMI 2 • hdMI 2 Input
• hdMI 2 Input
hdMI 3 • hdMI 3 Input
• hdMI 3 Input
portable audio device Aux 1 or Aux 2 • Aux inputs on front and rear panels
• not required
cd player cd • cd Analogue Inputs
• Any one available coaxial or optical digital
audio input
cd-r, Minidisc, cassette tape • tape Analogue (inputs and outputs)
• Any one available coaxial or optical digital
audio input
• use corresponding optical digital output
• not required
• not required
Note: the AVr is equipped with a total of three digital audio inputs. certain digital audio connections are recommended simply because those digital audio inputs are assigned to those sources by
default at the factory. but any digital audio input may be reassigned to any source. Since you may not be using all of the AVr's sources, you may reassign a digital audio input that is recommended
for a source you aren’t using to another device. table A1 is a guideline; you may need to make adjustments to fit your system.
logIc 7
MoVIe
logIc 7
MoVIe
logIc 7
MoVIe
Appendix
logIc 7
MoVIe