Temperature Controllers - Home | Kimray Mobile

Temperature Controllers
Throttling Thermostats
Indirect Throttle T 12
Features:
Single adjustment
High accuracy
Intermittent-bleed construction
Bi-metalic sensing element
Supply Pressure: 5 to 30 psig
Indirect control of burner valves, mixing valves, air shutters
Indirect Throttle High Capacity
T 12T
Working Pressure (sensing element):
500 psig without Separable Socket
4000 psig with Separtable Socket
7000 psig with Special Separable Socket
Separable socket is an extra price item and is ordered
separately.
Temperature Range:
T 12, T 18 -30 o to 400 o F
-34 o to 204 o C
HT 12, HT 18 -30 o to 750 o F
-34 o to 399 o C
Options:
Elastomers: HSN, Viton ® , Aflas ®
Metal Material: 316 Stainless Steel internal
exposed parts
Indirect control of burner valves, mixing valves, air shutters
where quick response or high volume of pneumatic output is
required.
Indirect Throttle with Burner Valve 1TC 12
Indirect Acting Thermostats:
Output decreases with temperature rise.
Direct Acting Thermostats:
Output increases with temperature rise.
Temperature controller includes T 12 Thermostat, Filter Pop
Valve, and 1” Burner Valve.
Direct Throttle
Direct control of burner valves, mixing valves, air shutters
T 12TDA
NO “DEADBAND”
The sensing element in the Kimray
Thermostat is a bi-metalic probe. The outer
tube is 304 stainless steel, and the inner
rod is low expansion nickel. The expansion
rates due to heat in both the metals are very
consistent which provides smooth, proportional
output -- throttling action.
When the thermostat is installed with its
probe completely surrounded by the liquid
or gas it is monitoring, there is virtually no
deadband.
Other types of thermostats providing such
control cost considerably more, and lack the
simplicity.
In describing the Kimray Thermostat folks
have said,
“IT’S LIKE A CADILLAC THERMOSTAT
AT A CHEVY PRICE!”
5-3