Temperature Controllers - Home | Kimray Mobile

Temperature Controllers
Shut - Downs
Indirect High Temperature Shut-Down
T 12M
Features:
Single adjustment
High accuracy
Intermittent-bleed construction
Bi-metalic sensing element
Supply Pressure: 5 to 30 psig
Working Pressure (sensing element):
500 psig without Separable Socket
4000 psig with Separtable Socket
7000 psig with Special Separable Socket
Separable socket is an extra price item and is ordered
separately.
For temperature controlled system shutdown until manually
reset. Shuts off when system temperature exceeds setpoint
Direct Low Temperature Shut-Down
T 12DAM
Temperature Range:
T 12, T 18 -30 o to 400 o F
-34 o to 204 o C
HT 12, HT 18 -30 o to 750 o F
-34 o to 399 o C
Options:
Elastomers: HSN, Viton ® , Aflas ®
Metal Material: 316 Stainless Steel internal
exposed parts
Indirect Acting Thermostats:
Output decreases with temperature rise.
Direct Acting Thermostats:
Output increases with temperature rise.
For temperature controlled system shutdown until manually
reset. Shuts off when system temperature drops below setpoint
5-5
Pilot Guard
HT12 PG
“TURN IT OFF, QUICK!”
Sometimes it’s too hot-
Sometimes it’s too cool-
Sometimes the fire just goes out.
Whatever the reason, if the temperature gets out
of control, you need to shut everything off right
away! These shut-downs are just what you need,
when you need to stop and start over.
Indirect action for system shut-down when pilot flame goes
out. Also used in direct mode for high stack temperture
shutdown