Drum mowers - ACI Distributors

More documents

Recommendations

Info

CM 190-230-270F(P)-295F(P) Continuously variable cutting height adjustment Vicon offers four models with continuously variable cutting height adjustment; two front mowers CM 270F(P) and CM 295F(P) and two mounted mowers CM 190 and CM 230. The cutting height is adjusted with a spindle at the top of the mower; within easy reach and continuously variable. So you no longer have to crawl under the mower and you can check at a glance whether the cutting height on the left and on the right are set the same. Cutting height adjustment CM 190 and CM 230 quickly ready for operation You can put both mowers from transport to working position and back without leaving the tractor. On the CM 230 that is done hydraulically. In order not to take too much load off the tractor front axle, a hydraulic folding cylinder is available that folds up the mower to the rear or to the right of the tractor. Also available with conditioner The CM 190 and 230 can be supplied or retrofitted with a drum conditioner. With a special mounting plate and cleverly designed fasteners, the conditioner can be mounted and dismounted without special tools; flexible and time-saving. combination of large and small drums ensures maximum crop discharge and a double swath that is easily picked up by tedders or loading wagons. With the large swath wheels you determine the width: narrow swaths (90 cm) for daily indoor feeding or wide for forage harvesting. Optimum ground adaptation With their simple, rigid frame both mowers are an efficient and cost-effective solution for every forage specialist. The flexible top link ‘Flextop’ or the telescopic top link ‘Frontflex’ ensure unique ground adaptation in the driving direction. Transverse ground adaptation is ensured by the front lift linkage arms. For tractor front lifts without pendulum device, a version with pendulum frame is available. This frame is designed to push the mower from fixed hinge points rather than vertical slotted holes. That allows the mower to move across the driving direction, also at high ground pressure. The result is a clear cut and an undamaged sward. Tested safety drive The V-belts with automatic tensioner ensure a regular and reliable drive. A shearbolt in the main drive shaft protects the drive against overload. Top quality front mowers With the two large outer drums and two small inner drums the CM 270F(P) and CM 295F(P) set the standard in their class. The
Pendelflex frame Front mower combined with TK 300; cutting, conditioning and spreading full width Flextop Optimum swath shape Mowing at the front, conditioning at the rear If you use your front mower to cut fresh feed every day, but still want to condition the crop, you can opt for the TK 300. This trailed finger conditioner conditions the crop and spreads it full width in one pass without driving over the crop. CM 270F mower frame
Page 1 and 2: Front and rear mounted and trailed
Page 3 and 4: Standard compensation springs Adapt
Page 5: CM 338 3 transport positions: to th
Page 9 and 10: Ground pressure compensation preven
Page 11 and 12: Wheels Wide Multi-Ring Profil tyres
Page 13 and 14: CMP 9001(TK) - CMP 3001FZ-TK 9 m mo
Page 15 and 16: CM 298 CMP 2901 CM 338 CMP 3001FZ C

Drum mowers - ACI Distributors

Create successful ePaper yourself

Delete template?

Save as template?