Drum mowers - ACI Distributors

Ground pressure compensation
prevents swath damage
Two sturdy compensation springs reduce the
pressure of the mower frame on the ground.
You can quickly adjust the setting to the soil
conditions. Together with the freely rotating
saucers this prevents sward damage.
Standard conditioner
Both mowers have an integrated conditioner
with extra large conditioning rotor and wearresistant
stiff synthetic fingers. The throughput
capacity is high, even in dense crop the
conditioner requires relatively little power. As
standard the mowers come with continuously
adjustable spreader elements that allow you
to deposit the swath at any desired width.
Moreover, you can adjust the conditioning
intensity to any type and quantity of crop.
To enable you to work without conditioner in
certain cases, for instance for feeding in the
barn, it can be mounted and dismounted very
quickly. For this purpose a set of support
wheels for the conditioner and a protective
cover are optionally available.
Always a regular swath
The mower frames of the CMP 2601 and
2901 have two large outer drums and two
smaller inner drums. They effortlessly transport
the crop over the full width to the conditioner.
In the CMP 2901 the drum directly next to
the tractor wheel has an extra large diameter.
Also when cutting with more overlap, the crop
quantity to the conditioner on the left and on
the right remains the same and in all events
an even swath is produced.
Quick exchange of blades
The quick exchange system allows you to
exchange blades with one hand. With a special
blade wrench you push the blade holder down
over the dead centre position and you have
both hands free to exchange the blades.
Combination of a front mower, a CMP 2901
and a TK 300D. A mowing width of
5.50 metres and full width spreading
without driving over the crop
Quick exchange of blades