Hardware Manual - NEC UX5000

Chapter 1 - Installing the Chassis
1.6.1.1 Installing the Short-Term Battery Box in the 9.5” Chassis-B
1. Make sure the chassis is powered off and unplugged.
2. On the battery box compartment, remove the 2 screws under the battery box then remove the
top cover.
Figure 1-18:
REMOVE SCREWS AND TOP COVER
3. Remove the metal support bracket.
4. Insert the 2 short-term batteries.
Figure 1-19:
INSERT BATTERIES
5. Place the battery cable on top of the batteries and adjust it to take up the extra length. Allow
enough length for the connections to be made to the equipment.
1 - 18 Chapter 1