14.01.2015 Views

Solar Water Heating - Heschong Mahone Group

Solar Water Heating - Heschong Mahone Group

Solar Water Heating - Heschong Mahone Group

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Measure Information Template Page 4<br />

c. Type of<br />

Change<br />

Prescriptive Requirement - This proposed measure would increase the prescriptive<br />

required fraction of water heating provided by solar water heating for single-family<br />

housing with electric resistance water heating systems from the existing 25% to a<br />

climate-zone dependent percentage.<br />

For the non-residential Base Code, the proposed measure would introduce a required<br />

fraction of water heating provided by solar water heating for restaurants with natural-gas<br />

water heating and at least 12,500 sq. ft of conditioned and unconditioned floor area.<br />

For the non-residential Base Code, the proposed measure would introduce a required<br />

fraction of water heating provided by solar water heating for restaurants with electric<br />

storage water heating and at least 1,500 sq. ft. of conditioned and unconditioned floor<br />

area.<br />

Modeling - This measure would modify the calculation procedures and assumptions used<br />

in making performance calculations, by introducing an hourly model into the Alternative<br />

Calculation Method (ACM) Manual to more accurately reflect solar radiation and match<br />

the hourly Time Dependent Valuation of electricity used by the CEC in Title 24<br />

development and compliance. This measure also moves "<strong>Solar</strong> <strong>Water</strong> <strong>Heating</strong>"<br />

capabilities which are currently in "1.2 Optional Model Capabilities" of the ACM Manual<br />

and places them into "1.1. Minimum Modeling Capabilities."<br />

The proposal measure also introduces a reduction in the water heating energy budget in<br />

the performance approach for restaurants.<br />

The proposal introduces a differentiation of restaurant occupancy types, with new<br />

definitions of “quick-service” and “full-service” restaurants. Finally, the proposal also<br />

introduces hot water demand load profiles for each into the ACM, while integrating these<br />

load profiles into the F-Chart tool.<br />

Other - The change would modify the language and visual representation of the solar<br />

fraction requirement in the standard, compliance manual and compliance form<br />

2013 California Building Energy Efficiency Standards March 2011

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!