User / Operation Manual - VersaClimber

(1) 5/8" diameter x 41/4” hex head bolt and
locking nut
(2) 5/16" diameter x 21/2" round head
screws
(2) 3/8" - 16 x 1" hex head long bolts
(1) 3/8" - 16 diameter x 13/4" hex head screw
(7) 3/8" - self locking nuts
(1) 1/4" hex key
(1) 3/16" hex key
2) 5/16 – 18 x 1.5” Flat head bolt
(2) 3/8 – 16 x 1” Flat head bolt
(2) Washers
ASSEMBLY OF A VERSACLIMBER LX Series
Due to the durable, double welded, steel construction of the VersaClimber, two able bodied
persons are required for its set up. The set up procedure requires two 9/16” wrenches and two
crescent wrenches for pedals and side hand rails. Set up can be accomplished in about 15-
20 minutes. When handling the machine, avoid lifting the machine by, or setting the
machine on any part of the black housing or oil reservoir (accumulator).
TOOLS REQUIRED FOR ASSEMBLY:
(I) Phillips screwdriver
(2) 9/16" wrenches
(2) Crescent wrenches
(1) 1/4" hex key
(2) 3/16" hex key
Two able body persons are
required for assembly.
HARDWARE PACKAGE CONTENTS
NOTE:
Page 25
Crescent Wrench
9/16" wrenches
Philips screw driver
1/4" hex key
3/16" hex key