User / Operation Manual - VersaClimber
User / Operation Manual - VersaClimber
User / Operation Manual - VersaClimber
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TO LEVEL THE MACHINE FRONT TO<br />
BACK, LOOSEN THE 3/8” X 21/4“ LONG<br />
BOLT. Position the base plate flat on the<br />
floor. Move the brace in the slot until the<br />
machine is stable front to back. Tighten the<br />
21/4” long bolt.<br />
Leveling Knob<br />
TO LEVEL MACHINE LEFT TO RIGHT, first<br />
level front to back. Then raise or lower the<br />
two adjusting knobs in the base plate until the<br />
machine is stable.<br />
Install the AC adaptor by plugging the<br />
circular plugs into the appropriate receptacle<br />
at the top of each <strong>VersaClimber</strong> (LX models<br />
only), then plug it into any standard 120V wall<br />
outlet or extension cord.<br />
Page 29<br />
Notes:
Change language