Govt. ENGINEERING COLLEGE, BIKANER SCHEDULE - G

GOVT. ENGINEERING COLLEGE, BIKANER 

SCHEDULE - G 

NIT NO. :- ECB/STORE/2013-14/02 

Tender for :- A.C. for Electric Estate Estimated Cost:- Rs. 3,25,000.00 

Sale of Tender :- Up to 12 Noon. 06-07-12 Earnest Money:-Rs. 6500.00 

Last date of Tender Submission:- 3.00 PM, 06-07-12 

Opening Date of Tender:- 4.00 PM, 06-07-12 

Tender Cost:- Rs. 200/- (By Hand) 

Tender Cost :- Rs. 250 /- (By Post) (D.D.) 

Air Conditioner 

Name of Item 

Supply ,Installation and Testing of Air cooled split AC Cassette type 1.5 

Ton with Indoor unit, Outdoor Unit, Surface Concealed copper 

Refrigeration piping with insulation, suitable for 230/400 +/- 10% of 50 Hz 

1/3 AC supply capable for cooling Dehumidification, Air circulation Filter 

Ventilation. 

RATE 

Terms and conditions 

All page of tender should be signed and stamped. 

STCC is compulsory. Party may be asked for the sample/demo. 

Rate should be include all tax /charges & FOR Govt. Engineering College Bikaner. 

Tender will be finalized item wise. 

Successful firm has to submit agreement on stamp paper of Rs. 500 (Form 17) 

along with SD money @ 5% of order value. 

Committee has right to cancel tender of all or any item. 

 

 

 

In case of any clarification same can be clarify from Store 

Without EMD tender will be rejected. 

EMD should be in favour of Principal Govt. Engineering College Bikaner in 

shape of DD/Banker Cheque only. 

Registrar

Govt. ENGINEERING COLLEGE, BIKANER 



Tender for :- Internal Exam Copies Estimated Cost:- Rs. 1,75,000.00 


Last date of Tender Submission:- 3.00 PM, 06-07-12 Tender Cost:- Rs. 200/- (By Hand) 



Internal Exam Copies 

Name of Item 

12 Pages 60 GSM, Offset Printing, Binding & numbering 

(As per Sample) 

RATE 









 

 

 





Registrar




Tender for :- B10PAC MP150 System Estimated Cost:- Rs. 10,00,000.00 






Name of Item 

Technical Specifications 

DATA ACQUISITION SYSTEM 

Data acquisition and analysis system should provide a flexible tool for life science research and teaching needs. System should include all 

hardware, software and guides. 

Data acquisition and analysis software is to be an interactive, intuitive program that instantly views, measures, analyzes, and transforms data. 

Perform complex data acquisition, stimulation, triggering and analyses using simple pull-down menus and dialogs, provide real-time feedback. 

Multiple display options should be available during and after acquisition 

System Components 

 

 

 

 

 

 

1 Ethernet-ready data acquisition unit 

1 universal interface module 

1 software for Windows Vista with electronic manual 

1 network interface card 

1 Ethernet crossover cable 

1 12 V power transformer with cord 

Data Acquisition Unit Specifications 

Analog Inputs 

Number of Channels: 16 

Absolute Maximum Input: ±15 V 

Operational Input Voltage: ±10 V 

A/D Resolution: 16 Bits 

Accuracy (% of FSR): ±0.003 

Input impedance: 1.0 MOhm 

Analog Outputs 


Max number of waveforms output with acquisition: 2 

Output Voltage Range: ±10 V 

D/A Resolution: 16 bits 

Accuracy (% of FSR): ±0.003 

Output Drive Current: ±5 mA (max) 

Output Impedance: 100 Ohm 

RATE 

Digital I/O 


Voltage Levels: TTL, CMOS 

Output Drive Current: ±20 mA (max) 

External Trigger Input: TTL, CMOS compatible 

Time Base 

Min Sample Rate: 2 samples/hour 

Trigger Options: Internal, External or Signal Level 

Max Sample Rate 

MP Internal Memory: 200 K samples/sec (400K aggregate) 

PC Memory/Disk: 200 K samples/sec (400K aggregate) 

Internal Buffer: 6 M samples 

Analog Output Buffer: 512 Ks per analog output channel 

Serial Interface Type/Rate: Ethernet: UDP (10M bits/sec) 

Transmission Type: Ethernet 

Maximum cable length: 100 meters 

Power Requirements: 12VDC @ 2 amp 

Dimensions: 10cm x 11cm x 19cm 

Weight: Approx 1.0 kg 

EEG 

Electroencephalogram Amplifier EEG 

The Electroencephalogram (EEG) Amplifier should amplify bioelectric potentials associated with neuronal activity of the brain and perform 

Unipolar or bipolar EEG measurements. The amplifier output should be switched between normal EEG output and Alpha wave detection. 

Gain: 5000, 10000, 20000, 50000

Output selection: 

Low Pass Filter: 

High Pass Filter: 

Notch Interference Filter: 

Noise Voltage (0.1-35 Hz): 

Zin: 

CMRR: 

Common Mode Input Voltage Range: 

Output Range: 

Input Voltage Range: 

Normal, Alpha wave indicator 

35 Hz, 100 Hz 

0.1 Hz, 1.0 Hz 

50 dB rejection @ 50/60 Hz 

0.1 µV (rms) 

2 Mohm (Differential) 

1000 Mohm (Common mode) 

110 dB min (50/60 Hz) 

±10 V (referenced to amplifier ground) 

±1500 VDC (referenced to mains ground) 

±10 V (analog) 

Gain 5000 Vin ±2 (mV) 

Gain 10000 Vin ±1 (mV) 

Gain 20000 Vin ±0.5 (mV) 

Gain 50000 Vin ±0.2 (mV) 

12-LEAD ECG RECORDINGS 

To record a 12-lead ECG, eight ECG100C amplifier, Two of the amplifiers can record Leads I, II, 

III, aVR, aVL, and aVF. Apply the Wilson Terminal (WT100C) to these amplifiers to generate a 

virtual reference for the six remaining amplifiers, which are assigned the precordial chest leads 

(V1-V6). Alternatively, can obtain a 12-lead recording with three ECG100C modules and TSD155C 

multi-lead ECG cable. This cost-effective option displays Leads I, II, III, aVR, aVL, and aVF 

simultaneously, plus one chest lead. Move the chest lead from one precordial location to the next 

to record a complete 12-lead ECG. 

 

 

 

Online calculation channels 

Eight amplifiers required for continuous 12-lead recording 

Cost-effective 12-lead recording with the multi-lead cable 

Item 

Description 

ECG100C 

WT100C 

ECG Electrocardiogram Amplifier 

Wilson Terminal for ECG100C TP, 20 cm 

TSD155C Multi-lead ECG Cbl, C- 

EMG100C SPECIFICATIONS 

Gain: 500, 1000, 2000, 5000 

Output Range: ±10V (analog) 

Low Pass Filter: 500Hz, 5000Hz 

High Pass Filter: 1.0Hz, 10Hz, 100Hz 

Notch Filter: 50dB rejection @ 50/60Hz 

Noise Voltage: 0.2μV rms - (10-500Hz) 

Z (input): 2M(Differential) 

1000M(Common mode) 

CMRR: 110dB min (50/60Hz) 

CMIV: ±10V (referenced to 

amplifier ground) 

±1500 VDC (referenced to 

mains ground) 

Input Voltage Range: Gain Vin (mV) 

500 ±20 

1000 ±10 

2000 ±5 

5000 ± 











EMD should be in favour of Principal Govt. Engineering College Bikaner in shape of DD/Banker Cheque only. 

Registrar




Tender for :- Networking Item’s Estimated Cost:- Rs. 283000.00 






 

Rackmount Switch 10/100 24 port + 4 port Giga combo with SFP 

Requirement 

Should have 26 Ethernet 10/100/1000 ports 

Rate 

2 combo mini-GBIC ports 

Switching capacity should be min 56 Gbps 

Forwarding Rate should be should be more than 41 Millions of Packets per Second (mpps) (64-byte packets) 

8000 MAC address supported 

255 IGMP groups 

Frame sizes up to 10 KB supported on 10/100 and Gigabit interfaces 

Packet Buffer should be 4Mb or more 

MTBF 175,000 hrs or more 

Standard 802.1d Spanning Tree support 

Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default 

Multiple Spanning Tree instances using 802.1s (MSTP) 

Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) 

Up to 8 groups 

Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation 

IEEE 802.1Q VLAN encapsulation. Support for Up to 256 VLANs out of 4096 VLAN IDs 

Port-based and 802.1Q tag-based VLANs 

MAC-based VLAN 

Management VLAN 

Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks 

Guest VLAN 

Unauthenticated VLAN 

Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS 

VLANs transparently cross a service provider network while isolating traffic among customers 

Protocols for automatically propagating and configuring VLANs in a bridged domain 

Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82 

IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups (source-specific 

multicasting is also supported) 

IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router. 

Head-of-line (HOL) blocking prevention 

Wirespeed routing of IPv4 packets 

Up to 32 static routes and up to 32 IP interfaces 

Support for Classless Inter-Domain Routing (CIDR)

Relay of DHCP traffic across IP domains 

Relay of broadcast information across Layer 3 domains for application discovery or relaying of BootP/DHCP packets 

IPv6 host mode , IPv6 over Ethernet 

Dual IPv6/IPv4 stack 

IPv6 neighbor and router discovery (ND) 

IPv6 stateless address auto-configuration 

Path maximum transmission unit (MTU) discovery 

Duplicate address detection (DAD) 

IPv6 over IPv4 network with Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) support 

Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), 

SNMP, RADIUS, syslog, DNS client, protocol-based VLANs 

ICMP version 6 

Priority levels - 4 hardware queues 

Strict priority and weighted round-robin (WRR) 

Queue assignment based on DSCP and class of service (802.1p/CoS) 

Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/type of service (ToS)/DSCP based; Differentiated Services 

(DiffServ); classification and re-marking ACLs, trusted QoS 

Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based 

SSH secures Telnet traffic to and from the switch; SSH v1 and v2 are supported 

SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch 

Supports time-based 802.1X 

Port-based ACLs (PACLs) for Layer 2 interfaces to allow application of security policies on individual switch ports. Support for 

up to 512 rules 

802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode 

and single/multiple sessions 

Dynamic VLAN assignment 

A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a 

BPDU message is received on that port 

Secure Core Technology (SCT) to ensure that the switch will receive and process management and protocol traffic no matter 

how much traffic is received 

Layer 3 isolation to Allow/disallow routing between IP subnets or directly connected IP networks 

Layer 2 isolation Private VLAN Edge (PVE) with community VLAN - PVE (also known as protected ports) provides Layer 2 

isolation between devices in the same VLAN, supports multiple uplinks 

Locks MAC addresses to ports, and limits the number of learned MAC addresses 

Supports RADIUS and TACACS authentication. Switch functions as a client 

Storm control for Broadcast, multicast, and unknown unicast 

DoS attack prevention 

A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization 

Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code 

point (DSCP)/IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control 

Message Protocol (ICMP) packets, IGMP packets, TCP Flags 

Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, 

system dashboard, system maintenance, and monitoring 

SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM)

Embedded Remote Monitoring ( RMON ) software agent supports 4 RMON groups (history, statistics, alarms, and events) for 

enhanced traffic management, monitoring, and analysis 

IPv4 and IPv6 dual stack to ease migration 

Web browser upgrade (HTTP/HTTPS) and TFTP 

Upgrade can be initiated through console port as well 

Dual images for resilient firmware upgrades 

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports 

can be mirrored to one destination port. A single session is supported. 

Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can 

be mirrored to one destination port. A single session is supported. 

DHCP (Options 66, 67, 82, 129,and 150) to facilitate tighter control from a central point (DHCP server) to obtain IP address, 

auto-configuration (with configuration file download), and DHCP relay, 

Text-editable config files that can be edited with a text editor and downloaded to another switch, facilitating easier mass 

deployment 

Smartports for Simplified configuration of QoS and security capabilities 

Auto Smartports that applies the intelligence delivered through the Smartport roles and applies it automatically to the port 

based on the devices discovered over CDP or LLDP-MED. This facilitates zero touch deployments. 

Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported 

Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; SNTP; 

Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH secure support) 

The switch advertises itself using the Bonjour protocol. 

online support community for self-help 

Lifetime warranty with Next-Business Day Replacement 

Modular, PCB based and Keystone type Unshielded Twisted pair, category 6, EIA/TIA 568-B.2-1 

The keystone modules are fire-retardant, moulded plastic modules UL94 VO rated, 

consisting of horizontal index strips for ease of re-termination. 

110 IDC Termination 180 degree Punch, allowing wires between 22 – 26 AWG sizes. 

Meets or Exceeds EIA/TIA – 568 – b.2-1 Category 6 connecting hardware specification. 

RJ45 (8P8C) T568A/T568B colour coding termination. 

Cable Guide way to guide the cable on the rear side 

1U size for 6/12/24 Ports and 2U for 48 Ports. 

UL Listed and Third Party verified by ETL to “ANSI/TIA/ EIA-568-B-2.1” specifications 

Zero Bit Error verified by ETL. 

Cat 6UTP Patch Panel 

 

Cat 6 UTP Copper Cables Box 305 Mtrs 

23 AWG Annealed bare solid copper, CAT-6 UTP Cable, Channel optimized to 600 Mhz 

Meets EIA/TIA 568-B.2-1 Category 6 specifications, Passed UL 444 test and meets CM and CMR ratings 

Worst Case Cable Skew : 45 nsec/100 meters 

Characteristic Impendence : 100(+/- 3 ) Ohms 500MHz , Tested till 700 Mhz 

Conductor Annealed copper wire Diameter 0.52 mm (nominal) 

Insulation High Density polyethylene, Diameter 0.94 mm (nominal)

Support for Fast Ethernet and Gigabit Ethernet IEEE 802.3/5/12,Voice,ISDN, ATM 155 & 622 Mbps and Broadband 

DC Resistance Max: 6.6 Ohms/100m 



Sheath Fire retardant PVC Compound (FRPVC) Flame Rating : 60 deg. C As per UL 1685 CM 

PAIRS Colour code: Blue / White-Blue, Orange / White-Orange Green / White-Green, Brown / White - Brown 

Outer Sheath PVC compound Thickness Diameter 0.5 mm (nominal) Outer diameter 6.5 mm (nominal) 

ELECTRICAL CHARACTERISTICS at 20° C Input Impedance (0.772-100 MHz) : 100 + 15 Ohms 125-250 MHz) : 100 +/- 22 Ohms 

Mutual Capacitance : 5.0 nF/100m Capacitance, unbalance (Max.) : 330pF/100m 

Standard length: 305 Mtrs (1000 ft.) 

 

Cat 6 UTP Patch Cords 

1. Cat 6 UTP Patch Cord 1 Mtr 

2. Cat 6 UTP Patch Cord 2 Mtr 

Patch cords shall be of multi strand copper cable 

With Matching colored snag-less, elastomer polyolefin boot 

Terminals wirth gold contacts, 50 micron'' gold over nickel 

Patchcord has a characteristic impedence of 100 +/- 3 Ohms 

Patchcord has extra long boot to maintain the bend radius. 

Assembled with short body RJ45 50u gold plate to minimized untwist pair length. · 

Designed for high speed transmission · 

Improved PS -NEXT, ELFEXT and Return Loss performance. · 

Back-ward-compatibility with all current products and applications. 



 

Dual Information Outlets (Jacks) with dual face plates including gang box 

Made from high-impact, flame-retardant, UL- RATED 94v 0 thermoplastic - ABS 

DC Resistance: 0.1 ohms max 

Insulating resistance 500 mohms minimum. 

Current Rating : 1.5 A (max) 

Collapsible Angular Shuttered type jacks 

Support for Fast Ethernet and Gigabit Ethernet IEEE 802.3/5/12,Voice,ISDN, also 10G ATM 155 & 622 Mbps, Broadband 

ATM 155 & 622 Mbps, Broadband 

Spring Contact : 50u'' gold over 100u'' nickel 

Meets and exceeds ISO/IEC 11801:2002 Category 6 ,EIA/TIA 568-B.2-1 Category 6 component specifications 

The performance exceeds EIA/TIA 568-B.2-1 Category 6 component specifications 

The outlet is of IDC (insulation Displacement Contact) 180 deg punch type 



Angular Bezel Module Face Plate 

With clear label(Identification) 



DC Resistance: 0.1 ohms max 

Insulating resistance 500 mohms minimum. 

Current Rating : 1.5 A (max)

Collapsible Angular Shuttered type jacks 

Support for Fast Ethernet and Gigabit Ethernet IEEE 802.3/5/12,Voice,ISDN, also 10G ATM 155 & 622 Mbps, Broadband 

ATM 155 & 622 Mbps, Broadband 

Spring Contact : 50u'' gold over 100u'' nickel 

Meets and exceeds ISO/IEC 11801:2002 Category 6 ,EIA/TIA 568-B.2-1 Category 6 component specifications 

The performance exceeds EIA/TIA 568-B.2-1 Category 6 component specifications 

The outlet is of IDC (insulation Displacement Contact) 180 deg punch type 



Angular Bezel Module Face Plate 

With clear label(Identification) 


9U wallmount Racks 

Power distribution unit 6 socket 

600x600(WxD) Network Wallmount rack with 2 Fan and 1 tray 

Hardware packets 

Cable Manager 

Double-sided versions available in 1U design for management on both front and rear of rack/cabinet 

Covers include positive securing snap latches for trouble-free fastening 

The individual managers are rounded to allow patch cords to seamlessly enter and exit the managers without risk of cable deformation 

Front covers fully conceal all vertical patch cord routing through an easy to use, modular design. 

Covers can be hinged in either direction to facilitate quick and easy changes. 

Horizontal cable managers provide a fully integrated appearance for comprehensive management of patch cords 

Conduit 

Casing N Capping 50mmx 50mm ISI mark with T, Band, Cuppler, Elbow Internal & External joint and accessories 

Punch Down Tool 

Suitable for 22-26AWG wires 

Adjustable impact pressure between low and high 

It comes with both 110 and krone type of blades 

Sure lock blade holder 

RoHS Compliant 

EIA/TIA 568 A/B 

The tool bit can punch as well as trim the conductor 

Material:- High impact ABS 

Tool Bit:- Hardened Steel 

Crimpting Tool 

Termination suitable for 8P, 6P, 4P connectors 

Equipped 8P RJ-45, 6P RJ-12 and RJ-11 Connectors 

Sure lock blade holder 

RoHS Compliant 

EIA/TIA 568 A/B 

Material:- 7.5 Inch steel construction body 

Suitable for 22-26 AWG wires 

Ratchet Mechanism 











EMD should be in favour of Principal Govt. Engineering College Bikaner in shape of DD/Banker Cheque only. 

Registrar




Tender for :- Current and voltage sensor board Estimated Cost:- Rs. 2,00,000.00 






Name of Item 

Current and voltage sensor board 

Current sensor boards must be capable of sensing from 0 to 55 Amp and also should be 

capable of sensing either AC-DC both types of currents with linearity. Each boards must be 

capable of sensing three simultaneous current signal (both AC or DC). 

Voltage sensor card must be capable of sensing 0-600 Volts and also should be capable of 

sensing either AC-DC both types of voltages with linearity. Each boards must be capable of 

sensing three simultaneous voltage signal (both AC or DC). 

Sensing cards must be free of loading effect and should be provided with proper scaling 

circuitry. 

RATE 









 

 

 





Registrar




Tender for :- Voltage Source Converter Estimated Cost:- Rs. 1,30,000.00 






Name of Item 

Voltage Source Converter 

1. 25 KVA inverter (Voltage source converter), Input side :3 Phase uncontrolled diode 

rectifier, Output side :3 Phase IGBT modules bridges suitable for 25 kVA rating 

2. 5 KVA inverter(Voltage source converter), Input side :3 Phase uncontrolled diode rectifier 

Output side :3 Phase IGBT modules bridges suitable for 25 kVA rating 

3. 25 kVA inverter(Voltage source converter), Input side :3 Phase SCR bridge rectifier ,Output 

side :3 Phase IGBT modules bridges suitable for 25 kVA rating 

RATE 

All Modules should be equipped with SEMIKRON SKYPER 32A Gate driver cards(IGBT) 

with all kind of protection. All IGBT and diode modules should be SEMIKRON type 

modules of proper ratings. 













Registrar




Tender for :- DSP Based dSpace Controller Estimated Cost:- Rs. 6,50,000.00 






Name of Item 

DS1104 R&D Controller Board 

Single-board system with real-time hardware and comprehensive I/O. Real-Time Interface (RTI, p. 

56) provides Simulink ® blocks for graphical I/O conf guration. The board can be installed in 

virtually any PC with a free 5-V PCI slot. dSPACE 1104 R&D controller board with 8 ADC 

channels, 8 DAC channels, Hardware dongle with license. 

RATE









 

 

 





Registrar

Govt. ENGINEERING COLLEGE, BIKANER SCHEDULE - G

Create successful ePaper yourself

Delete template?

Save as template?