ENGINEERING COLLEGE, BIKANER - Govt. Engineering College ...

ENGINEERING COLLEGE, BIKANERSCHEDULE - GIT O. :- ECB/STORE/2010-11/03Tender for :- Civil Estate Department Estimated Cost:- Rs.4,58,000 /-Sale of Tender :- Up to 12 oon. 14.07.2010 Earnest Money:-Rs. 9,160/-Last date of Tender Submission:- 3.00 PM, 14.07.2010 Tender Cost:- Rs. 100/- (By Hand)Opening Date of Tender:- 4.00 PM, 14.07.2010 Tender Cost :- Rs. 140 /- (By Post) (D.D.)ame of work: -Approval for Fixing of Aluminum Panels with Door in Construction NewTute Rooms in Engineering College BikanerS. O. DESCRIPTIO QTY RATE1. PROVIDING AND FIXING ANODIZED ALUMINUM WORK (ANODIZING O BE GOT CONE 1000FROM APPROVED ANODIZER) FOR DOORS, WINDOWS, VENTILATORS ANDKG.PARTITION WITHEXTRUDED BUILT UP STANDARD TUBULAR AND OTHER SECTIONS OF APPROVEDMAKECONFORMING TO IS:733 AND IS:1285 ANODISED TRANSPARENT 81 DYED TOREQUIREDSHADE ACCORDING TO IS: 1868. ( MINIMUM ANODIC COATING OF GRADE AC 15),FIXED WITH RAWL PLUGS AND SCREWS OR WITH FIXING CLIPS, OR WITHEXPANSIONHOLD FASTENERS INCLUDING NECESSARY FILLING UP OF GAS AT JUNCTIONS , ATTOP ,BOTTOM AND SIDES WITH REQUIRED PVC/NEOPRENE FELT ETC. ALUMINUMSECTIONSHALL BE SMOOTH , RUST FREE , STRAIGHT , MITRED AND JOINTEDMECHANICALLYWHEREVER REQUIRED INCLUDING CLEAT ANGLE ALUMINUM SNAP BEADING FORGLAZING / PANELING , C.P. BRASS / STAINLESS STEEL SCREWS, ALL COMPLETE ASPERARCHITECTURAL DRAWINGS AND THE DIRECTIONS OF ENGINEER –IN- CHARGE.( GLAZING AND PANELING TO BE PAID FOR SEPARATELY.---FOR FIXED PORTIO2. PROVIDING AND FIXING ANODIZED ALUMINUM WORK (ANODIZING TO BE GOTCONEFROM APPROVED ANODIZER) FOR DOORS, WINDOWS, VENTILATORS ANDPARTITIONWITH EXTRUDED BUILT UP STANDARD TUBULAR AND OTHER SECTIONS OFAPPROVEDMAKE CONFORMING TO IS:733 AND IS:1285 ANODISED TRANSPARENT 81 DYEDTOREQUIRED SHADE ACCORDING TO IS: 1868. ( MINIMUM ANODIC COATING OFGRADEAC 15), FIXED WITH RAWL PLUGS AND SCREWS OR WITH FIXING CLIPS, OR WITHEXPANSION HOLD FASTENERS INCLUDING NECESSARY FILLING UP OF GAS ATJUNCTIONS ,AT TOP , BOTTOM AND SIDES WITH REQUIRED PVC/NEOPRENE FELT ETC.ALUMINUMSECTION SHALL BE SMOOTH , RUST FREE , STRAIGHT , MITRED AND JOINTED200KG.

MECHANICALLY WHEREVER REQUIRED INCLUDING CLEAT ANGLE ALUMINUMSNAPBEADING FOR GLAZING / PANELING , C.P. BRASS / STAINLESS STEEL SCREWS, ALLCOMPLETE AS PER ARCHITECTURAL DRAWINGS AND THE DIRECTIONS OFENGINEER –IN-CHARGE. ( GLAZING AND PANELING TO BE PAID FOR SEPARATELY. ----FOR SHUTTERS OF DOORS , WIDOWS & VETILATORS ICLUDIG PROVIDIGFOXIG HIGES / ROLLERS ETC. AD MAKIG PROVISIO FOR FIXIG OFFITTIGS WHEREVER REQUIRED (LOCKS SHALL BE PAID FOR SEPARATELY.)3. PROVIDING AN FIXING 12 MM THICK PRELAMINATED THREE LAYER MEDIUMDENSITY (EXTERIOR GRADE) PARTICLE BOARD GRADE I , TYPE II CONFORMING TOIS:12823 BONDED FORMALDEHYDE SYNTHETIC RESIN , OF APPROVED BRAND ANDMANUFACTURE IN PANELING FIXED IN ALUMINUM DOORS, WINDOWS SHUTTERSAND PARTITION FRAMES WITH C.P. BRASS / STAINLESS STEEL SCREWS ETC.COMPLETE AS PER ARCHITECTURAL DRAWING S AND DIRECTION OF ENGINEER-IN-CHARGE. ------PRELAMIATED PARTICLE BOARD WITH DECORATIVE LAMIATIO O BOTHSIDES.4. PROVIDING AND FIXING GLAZING IN ALUMINUM DOOR, WINDOW , VENTILATORSHUTTERS AND PARTITIONS ETC. WITH PVC/ NEOPRENE GASKET ETC. COMPLETEAS PER THE ARCHITECTURAL DRAWINGS AND THE DIRECTIONS OF ENGINEER-IN-CHARGE .(COST OF ALUMINUM SNAP BEADING SHALL BE PAID IN BASIC ITEM.) -----WITH GLASS PAES OF 5.0 MM THICKESS (WEIGHT OT LESS THA 10.0KG/SQM) AS PER IS:25355. PROVIDING AND FIXING GLAZING IN ALUMINUM DOOR, WINDOW , VENTILATORSHUTTERS AND PARTITIONS ETC. WITH PVC/ NEOPRENE GASKET ETC. COMPLETEAS PER THE ARCHITECTURAL DRAWINGS AND THE DIRECTIONS OF ENGINEER-IN-CHARGE .(COST OF ALUMINUM SNAP BEADING SHALL BE PAID IN BASIC ITEM.) -----WITH TITED GLASS PAES OF 5.0 MM THICKESS (WEIGHT OT LESS THA13.75 KG/SQM).6. PROVIDING AND FIXING BRASS LOCK WITHOUT HANDLE FOR ALUMINUM DOOR, OF60SQM55SQM15SQM30OS.APPROVED QUALITY , MAKE & DESIGN AS DIRECTED BY ENGINEER0-IN-CHARGE.7. DOOR CLOSER 10OS.Terms and conditions.• All page of tender should be signed and stamped.• STCC is compulsory. Party may be asked for the sample/demo.• Rate should be include all tax /charges & FOR Engineering College Bikaner.• Tender will be finalized item wise.• Successful firm has to submit agreement on stamp paper of Rs. 100 (Form 17) along with SD money @ 5%of order value.• Committee has right to cancel tender of all or any item.• In case of any clarification same can be clarify from store.• Without EMD tender will be rejected.• EMD should be in favour of Principal Engineering College Bikaner in shape of DD/Banker Cheque only.• Order will be given in installment as or when required.Chief Coordinator