Roboboa User Manual - WowWee

More documents

Recommendations

Info

Battery details Getting started To use your Roboboa, insert batteries (see below), place him on a large level surface with his battery compartments facing downwards, turn him on, and explore some of his functions from the Button overview table (see page 6). Read on for full details about your grooving, roving, attentive robot friend. Battery details This sections deals with battery information for your Roboboa and his remote controller. Roboboa battery requirements Your Roboboa is powered by 4 x “D” size batteries (not included). Battery installation Before installing or changing batteries, be sure the power button located on the robot’s tail is in the OFF position (see page 7). 1. Remove the battery compartment covers using a Phillips screwdriver (not included). 2. Insert batteries into Roboboa as illustrated in the diagram. 3. Replace the battery covers and all screws. 1.5V “D” LR20/UM1 1.5V “D” LR20/UM1 Bottom view of Roboboa’s body 1.5V “D” LR20/UM1 1.5V “D” LR20/UM1 Low power When Roboboa’s batteries are low, the LEDs on Roboboa’s face will continuously pulse with a hiss sound. When this happens, you need to replace all robot batteries. Remote controller battery requirements Roboboa’s remote controller is powered by 4 x “AAA” size batteries (not included). Battery installation To install the batteries in Roboboa’s remote controller: 1. Remove the battery compartment cover using a Phillips screwdriver (not included). 2. Insert batteries into the controller as illustrated in the diagram. 3. Replace the battery cover and lightly tighten the holding screw. Low power If Roboboa is not responding well to controller commands, you might need to replace the controller batteries. ATTENTION: Important battery information • Replace all batteries at the same time with new batteries of the same type, size, and brand. • Use only fresh batteries of required size and recommended type. • Do not mix old and new batteries, different brands of batteries (standard Carbon-Zinc, Alkaline or rechargeable), or rechargeable batteries of different capacities. • Respect the correct contact and battery polarities, (+) and (-). • Rechargeable batteries must be charged under adult supervision. • Do not attempt to recharge non-rechargeable batteries. • Do not burn or incinerate used batteries. • Do not short-circuit battery terminals. • Remove exhausted batteries from Roboboa to avoid leakage damage. • Batteries should be replaced under adult supervision. • Remove batteries if the toy is not going to be played with for some time. • Rechargeable batteries must be removed from the toy before being charged. 1.5V LR03 UM4 “AAA” 1.5V LR03 UM4 “AAA” 1.5V LR03 UM4 “AAA” 1.5V LR03 UM4 “AAA” 1.5V LR03 UM4 “AAA” 1.5V LR03 UM4 “AAA” Bottom view of remote controller
Roboboa Overview IR receiver Animation face lights On/Off button Motorized tail wheel IR transmitters Mode light button Casters Light sensor
Page 1: ROBOBOA A Fusion of Technology and
Page 4 and 5: Contents Welcome p.1 Contents p.2-3
Page 8 and 9: Controller Overview Mode button (sm
Page 10 and 11: Mode Light button / Remote controll
Page 12 and 13: Remote controller directional pad R
Page 14 and 15: Shutdown function / Mode light func
Page 16 and 17: Tail / Head function / Reset functi
Page 18 and 19: Sleep mode / Guard modes Even if yo
Page 20 and 21: Back function / Program play functi
Page 22: 20 Notes

Roboboa User Manual - WowWee

Create successful ePaper yourself

Delete template?

Save as template?