SHIELD WRAP™ - Parker

SHIELD WRAP
CABLE SHIELDING
Knitted SHIELD Wire WRAP Mesh Tape
Knitted Wire Mesh Tape
SHIELD WRAP Knitted Wire
SHIELD WRAP wire mesh EMI/EMP
Mesh Shielding Tape
shielding tape is produced as a two-ply
flattened cylinder SHIELD of WRAP varying wire widths, meshloop
spacings, EMI/EMP wire sizes shielding and metals. tape SHIELD is produced
WRAP mesh
as a
is
two-ply
designed
flattened
to wrap
cylinder
easily
of
(50%
varying widths, loop spacings, wire
overlap recommended) around cables and
sizes and metals.
harnesses, and will reduce corona discharge
SHIELD WRAP mesh is designed
in addition to to wrap providing easily (50% EMI shielding. overlap recommended)
flexibility around and cables conforms and easily
It
has excellent
to irregular harnesses, and complex and will surfaces. reduce Under corona
rising temperatures, discharge in the addition wire’s to knitted providing loops EMI
enlarge into shielding. each other It has instead excellent of flexibility bulging
away from and wrapped conforms surfaces, easily to as irregular do straight and
wires of woven complex mesh. surfaces. Although Under not rising intended
as a substitute temperatures, for braided the grounding wire’s knitted straps, loops
SHIELD WRAP
enlarge
mesh
into each
becomes
other
especially
instead of
bulging away from wrapped surfaces,
useful for grounding when considerable
as do straight wires of woven mesh.
flexibility is required. Standard SHIELD
Although not intended as a substitute
WRAP mesh for braided is available grounding in either straps, Monel* SHIELD
or Ferrex**, WRAP in wire mesh diameters becomes of especially 0.0035 in.
(0.09 mm) useful and 0.0045 for grounding in. (0.11 when mm), considerable
3/4 flexibility in. (19.1 is mm) required. to 2 in. (50.8
and
widths from
mm). Openings Standard per linear SHIELD in. are WRAP from mesh 8 to
14 for these is available materials. in either monel or Ferrex*,
in wire diameters of 0.0035 in. (0.09
mm) and 0.0045 in. (0.11 mm), and
widths from 3/4 in. (19.1 mm) to 2 in.
Contact (50.8 Information:
mm). Openings per linear in.
Parker are Hannifin from 8 to Corporation 14 for these materials.
Chomerics Mesh can Division also be fabricated from a
77 Dragon number Court of other metals, including aluminum,
MA 01801 silver-plated brass, copper,
Woburn,
tinned copper, nickel and stainless
steel. Strip widths up to 24 in. (600 mm)
phone 781 935 4850
can be provided.
fax 781 933 4318
For complete information, request
chomailbox@parker.com
Technical Bulletin 113.
Chomerics can supply mesh
www.chomerics.com
knitted in most metals with a
www.parker.com/chomerics
minimum wire diameter of .002 in.
(0.051 mm). Minimum order quantities
may apply. For custom applications,
contact Chomerics’ Applications
Engineering Department for
assistance.
Mesh can also be fabricated from a
number Ordering of Procedure other metals, including
Standard SHIELD WRAP mesh
aluminum, tinned copper, nickel and
(monel or Ferrex): Select the part
stainless steel. Strip widths up to 24
number from below. Include wire
in.
diameter
(600 mm)
[0.0035
can be
in.
provided.
(0.09 mm)
For
or
custom 0.0045 applications, in. (0.11 mm)] contact and length Parker
Chomerics of strip required. Applications Engineering
Department for assistance.
Fabricated or Non-Standard
SHIELD Fabricated WRAP or mesh: Non-Standard When SHIELD
SHIELD WRAP mesh: When SHIELD
WRAP mesh is fabricated from
WRAP mesh is to be fabricated from
other metal, or in a non-standard
another metal, or in a non-standard
size,
size,
consult
consult Chomerics’
Parker Chomerics
Applications
Applications
Engineering Engineering Department. Department. Part num-
Part
numbers will be will assigned be assigned by Chomerics. by Parker
Chomerics.
* Monel Table is a 1nickel-copper alloy per QQ-N-201.
** Ferrex® is Parker STANDARD Chomerics tin-plated, SHIELD WRAP KNITTED WIRE MESH
copper-clad steel wire per ASTM B-520. ASTM
(QQ-W343) tin-plate, 2-3% by weight; ASTM B-227
Strip Width
coppercladding 30-40% by weight; SAE 1010 steel
wire, balance by weight.
Metal 3/4 in. (19.1 mm) 1 in. (25.4 mm) 1-1/2 in. (38.1 mm) 2 in. (50.8 mm)
Part Number
Monel 05-0720-0272-02 05-0720-0432-02 05-0720-1012-01 05-0720-1532-01
Ferrex 05-0860-0272-02 05-0860-0432-01 05-0860-1012-03 05-0860-1532-04
Note: In addition to part number, desired wire diameter must be specified. Part numbers
shown above reflect 0.0045 in. wire diameters.
* Ferrex ® is Chomerics’ tin-plated, copper-clad
steel wire per ASTM B-520. ASTM (QQ-W-343)
tin-plate, 2-3% by weight; ASTM B-227 coppercladding
30-40% by weight; SAE 1010 steel
wire, balance by weight.

SHIELD WRAP - Product Information
Ordering Procedure
Standard SHIELD WRAP mesh (Monel or Ferrex): Select the part number
from below. Include wire diameter (0.0035 in. (0.09 mm) or
0.0045 in. (0.11 mm)] and length of strip required.
Table 1
STANDARD SHIELD WRAP KNITTED WIRE MESH
Strip Width
Metal 3/4 in. (19.1 mm) 1 in. (25.4 mm) 1-1/2 in. (38.1 mm) 2 in. (50.8 mm)
Part Number
Monel 05-0720-0272-02 05-0720-0432-02 05-0720-1012-01 05-0720-1532-01
Ferrex 05-0860-0272-02 05-0860-0432-01 05-0860-1012-03 05-0860-1532-04
Note: In addition to part number, desired wire diameter must be specified. Part numbers shown above reflect 0.0045 in.
wire diameters.
www.chomerics.com
www.parker.com/chomerics
CHOMERICS is a registered trademarks of Parker Hannifin Corporation. ® 2012 TB 1094 EN December 2012