55291 NDT BROCHURE.indd - NDT Equipment
55291 NDT BROCHURE.indd - NDT Equipment
55291 NDT BROCHURE.indd - NDT Equipment
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CALIBRATION BLOCKS<br />
Ultrasonic – USA Specifications<br />
- Carbon Steel/Stainless Steel/Aluminium (all Prices On Application)<br />
11W Block type 1<br />
Similar to Number 1 Block<br />
11W Block type 2<br />
Similar to Number 1 with deep cut out<br />
Type DSC (AWS)<br />
Shear wave distance and sensitivity calibration<br />
Angle Beam<br />
Similar to DSC Block<br />
AWS Resolution<br />
Checking Resolution of Angle Beam Probes<br />
Type SC (AWS)<br />
Shear wave Sensitivity Calibration<br />
Type DC (AWS)<br />
Shear wave Distance Calibration<br />
Low Beam Profile<br />
Similar to BCB (IOW) Imperial or metric<br />
Navships Block<br />
Distance amplitude calibration to 0900-006-3010<br />
ROMPAS Block<br />
Miniature angle beam block<br />
Step Blocks<br />
4 Steps or 5 Steps<br />
ASTM Single E127-64<br />
Varying metal distance and flat bottom hole diameter<br />
ASTM Distance / Amplitude Set 19 Blocks with the same size FBH and varying metal distance<br />
Specify Hole Diameter<br />
ASME Blocks<br />
Please state required specification.<br />
�� The above is only a selection of Calibration Blocks. Others are available on request.<br />
�� Blocks can be supplied to other country standards – Germany, France, Japan etc.<br />
Eddy Current Price (£)<br />
3 Notch Carbon Steel 0.2mm, 0.5mm, 1.0mm Deep Notches 88.00<br />
3 Notch Stainless Steel 0.2mm, 0.5mm, 1.0mm Deep Notches 124.00<br />
3 Notch Aluminium 0.2mm, 0.5mm, 1.0mm Deep Notches 110.00<br />
3 Notch Titanium<br />
Weldscan<br />
0.2mm, 0.5mm, 1.0mm Deep Notches 295.00<br />
3 Notch EN1A 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers 196.00<br />
3 Notch Stainless Steel 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers P.O.A<br />
3 Notch Aluminium 0.5 – 1-2mm Notches 4 x 0.5 Lift off Spacers P.O.A<br />
Other materials available, please ask for prices, alternatively blocks manufactured to free issue material<br />
��Calibration Blocks can be made with any combination of spark eroded / machined notches and holes<br />
��Calibration Blocks to aircraft manufacturer specifications.<br />
Quality Assurance<br />
Each block is engraved with a unique serial number and fully certified to the requirements of European<br />
standards 12223, 27963 (where applicable) British Standards 2704 (1978) and DIN 54120 together<br />
with independent material chemical analysis and certification of heat treatment to DIN 54120 (grain refining)<br />
all of which is fully traceable. Certification as appropriate outside of Europe.<br />
A full independent UKAS certification for physical measurements is available, Prices on application<br />
Aircraft Standards<br />
We are able to offer aircraft standards (test blocks) for most aircraft, please provide us with the Aircraft<br />
type and reference number of the test piece you require including probes<br />
Click here to return to contents page v<br />
Page 46
Change language