55291 NDT BROCHURE.indd - NDT Equipment
55291 NDT BROCHURE.indd - NDT Equipment
55291 NDT BROCHURE.indd - NDT Equipment
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The FloormapVS inspection<br />
system uses advanced<br />
magnetic flux leakage<br />
technology housed in an<br />
ergonomically designed<br />
motorised scanner. The<br />
on-board ruggedised,<br />
weatherproof computer uses<br />
touch screen.<br />
Data acquisition and<br />
analysis, as well as data<br />
reduction, is carried out in<br />
real time resulting in only<br />
useful information being<br />
stored to the hard drive.<br />
Graphical reporting software<br />
allows the operator/client to<br />
view all corrosion, filter<br />
results to identify areas of<br />
immediate concern and<br />
produce pre-formatted hard<br />
copy reports as well as the<br />
electronic version.<br />
�� Advanced magnetic flux<br />
leakage technology<br />
�� Ruggedised touch<br />
screen computer<br />
�� Real time data<br />
acquisition and analysis<br />
Click here to return to contents page v<br />
TANKFLOOR SCANNERS / MAPPING UNITS<br />
The MFL 2000 is a highspeed,<br />
motorised magnetic<br />
flux leakage scanner capable<br />
of inspecting between 5000-<br />
8000 square feet per shift.<br />
The ergonomic design coupled<br />
with the latest magnetic<br />
technology have resulted in an<br />
easy to operate, accurate,<br />
reliable and cost effective<br />
inspection tool.<br />
The motorised scanner has an<br />
auto-stop system, which<br />
ensures any defect above the<br />
operator adjustable threshold<br />
is identified. All controls are<br />
situated in a recess at the top<br />
of the unit allowing easy<br />
viewing and operation whilst<br />
being protected against<br />
accidental adjustment.<br />
�� High speed, Cost<br />
Effective Inspection<br />
�� Easy to use ergonomic<br />
design<br />
�� Minimal maintenance<br />
requirements<br />
Automatic defect detection<br />
system<br />
PRICES AND INFORMATION ARE AVAILABLE ON REQUEST<br />
Page 71<br />
The Handscan system is<br />
designed to compliment the full<br />
sized scanners, MFL 2000 and<br />
Floormap 2000. Even in such<br />
a small configuration the latest<br />
generation of permanent<br />
magnets enable localised<br />
magnetic saturation of the floor<br />
area under test. Signals from<br />
corrosion, above the operator<br />
controllable threshold, are<br />
displayed as both a visual and<br />
audible alarm. It’s low profile<br />
and extendable handle allow<br />
scanning in otherwise<br />
inaccessible areas of storage<br />
tanks such as the shell to<br />
annular area and under pipe<br />
work or heater coils.<br />
�� Latest generation<br />
permanent magnet<br />
technology<br />
�� Easy to use, cost<br />
effective inspection tool<br />
�� Low profile with<br />
extendable handle<br />
�� Separate battery<br />
operated light weight<br />
electronic module