Linkbelt-LS208H2-Spec - Rawalwasia

1. The capacities included in the “Duty Cycle Capacities – Angle
Boom” chart are the maximum allowable, and are based on
crane standing level on firm suporting surface under ideal job
conditions.
2. Capacities are based on 75% of minimum tipping loads for drag
line, 67.5% for clamshell.
3. Capacities are maximum recommended by PCSA Standard #4.
Operator must make allowances for soft or uneven supporting
surfaces, rapid cycle operations, bucket suction, or other unfavor
able conditions which may require smaller buckets for most
efficient operation.
4. Weight of bucket plus load, must not exceed these capacities.
5. Dragline operation is not recommended with boom angles less
than 35.
6. Boom length for dragline/clamshell attachment operation should
not exceed 100 ft.
7. Retractable high gantry must be fixed in raised position for all
capacities on the “Duty Cycle Capacities – Angle Boom” chart.
8. These capacities apply to the machine as originally manufac–
tured and normally equipped by Link–Belt Construction
Equipment Company.
Side Frames Extended – “A” or “AB”
Boom
Load
Boom
Counterweight (All capacities
listed are in pounds)
Length Radius Angle Dragline Clamshell / Magnet
(ft) (ft) (deg)
“A” “AB” “A” “AB”
CTWT CTWT CTWT CTWT
40 8.9 82.0 – – – – – – 29,500 29,500
40 9 81.8 – – – – – – 29,500 29,500
40 10 80.3 – – – – – – 29,500 29,500
40 11 78.9 – – – – – – 29,500 29,500
40 12 77.4 – – – – – – 29,500 29,500
40 13 75.9 – – – – – – 29,500 29,500
40 14 74.5 – – – – – – 29,500 29,500
40 15 73.0 – – – – – – 29,500 29,500
40 16 71.5 – – – – – – 29,500 29,500
40 17 69.9 – – – – – – 29,500 29,500
40 18 68.4 – – – – – – 29,500 29,500
40 19 66.9 – – – – – – 29,500 29,500
40 20 65.3 – – – – – – 29,500 29,500
40 25 57.1 29,500 29,500 29,500 29,500
40 30 48.1 29,500 29,500 28,260 29,500
40 35 37.5 25,100 29,500 22,590 29,500
40 40 23.4 – – – – – – 18,630 26,640
50 10.3 82.0 – – – – – – 29,500 29,500
50 11 81.1 – – – – – – 29,500 29,500
50 12 80.0 – – – – – – 29,500 29,500
50 13 78.8 – – – – – – 29,500 29,500
50 14 77.6 – – – – – – 29,500 29,500
50 15 76.4 – – – – – – 29,500 29,500
50 16 75.3 – – – – – – 29,500 29,500
50 17 74.1 – – – – – – 29,500 29,500
50 18 72.9 – – – – – – 29,500 29,500
50 19 71.7 – – – – – – 29,500 29,500
50 20 70.5 – – – – – – 29,500 29,500
50 25 64.3 – – – – – – 29,500 29,500
50 30 57.7 29,500 29,500 28,170 29,500
50 35 50.6 25,100 29,500 22,590 29,500
50 40 42.7 20,800 29,500 18,720 26,820
50 50 20.9 – – – – – – 13,500 19,710
60 11.7 82.0 – – – – – – 29,500 29,500
60 12 81.6 – – – – – – 29,500 29,500
60 13 80.7 – – – – – – 29,500 29,500
60 14 79.7 – – – – – – 29,500 29,500
60 15 78.7 – – – – – – 29,500 29,500
60 16 77.8 – – – – – – 29,500 29,500
60 17 76.8 – – – – – – 29,500 29,500
60 18 75.8 – – – – – – 29,500 29,500
60 19 74.8 – – – – – – 29,500 29,500
60 20 73.8 – – – – – – 29,500 29,500
60 25 68.8 – – – – – – 29,500 29,500
60 30 63.6 – – – – – – 27,990 29,500
60 35 58.1 25,000 29,500 22,500 29,500
60 40 52.3 20,700 29,500 18,630 26,640
60 50 38.9 15,000 21,900 13,500 19,710
60 60 19.0 – – – – – – 10,260 15,300
70 13.1 82.0 – – – – – – 29,500 29,500
70 14 81.2 – – – – – – 29,500 29,500
70 15 80.4 – – – – – – 29,500 29,500
70 16 79.5 – – – – – – 29,500 29,500
70 17 78.7 – – – – – – 29,500 29,500
Side Frames Extended – “A” or “AB”
Boom
Load
Boom
Counterweight (All capacities
listed are in pounds)
Length Radius Angle Dragline Clamshell / Magnet
(ft) (ft) (deg)
“A” “AB” “A” “AB”
CTWT CTWT CTWT CTWT
70 18 77.9 – – – – – – 29,500 29,500
70 19 77.0 – – – – – – 29,500 29,500
70 20 76.2 – – – – – – 29,500 29,500
70 25 71.9 – – – – – – 29,500 29,500
70 30 67.6 – – – – – – 27,900 29,500
70 35 63.1 – – – – – – 22,320 29,500
70 40 58.4 20,500 29,400 18,450 26,460
70 50 48.1 14,900 21,700 13,410 19,530
70 60 35.9 11,300 16,900 10,170 15,210
70 70 17.6 – – – – – – 7,920 12,150
80 14.5 82.0 – – – – – – 29,500 29,500
80 15 81.6 – – – – – – 29,500 29,500
80 16 80.9 – – – – – – 29,500 29,500
80 17 80.1 – – – – – – 29,500 29,500
80 18 79.4 – – – – – – 29,500 29,500
80 19 78.7 – – – – – – 29,500 29,500
80 20 77.9 – – – – – – 29,500 29,500
80 25 74.2 – – – – – – 29,500 29,500
80 30 70.5 – – – – – – 27,720 29,500
80 35 66.6 – – – – – – 22,140 29,500
80 40 62.7 – – – – – – 18,270 26,280
80 50 54.3 14,600 21,500 13,140 19,350
80 60 44.8 11,100 16,700 9,990 15,030
80 70 33.5 – – – – – – 7,830 12,060
80 80 16.5 – – – – – – 6,120 9,810
90 15.9 82.0 – – – – – – 29,500 29,500
90 16 81.9 – – – – – – 29,500 29,500
90 17 81.2 – – – – – – 29,500 29,500
90 18 80.6 – – – – – – 29,500 29,500
90 19 79.9 – – – – – – 29,500 29,500
90 20 79.3 – – – – – – 29,500 29,500
90 25 76.0 – – – – – – 29,500 29,500
90 30 72.7 – – – – – – 27,540 29,500
90 35 69.4 – – – – – – 21,960 29,500
90 40 65.9 – – – – – – 18,090 26,100
90 50 58.7 14,400 21,300 12,960 19,170
90 60 50.9 10,900 16,500 9,810 14,850
90 70 42.2 8,500 13,200 7,650 11,880
90 80 31.5 – – – – – – 6,030 9,630
90 90 15.5 – – – – – – 4,770 7,920
100 17.2 82.0 – – – – – – 29,500 29,500
100 18 81.5 – – – – – – 29,500 29,500
100 19 81.0 – – – – – – 29,500 29,500
100 20 80.4 – – – – – – 29,500 29,500
100 25 77.5 – – – – – – 29,500 29,500
100 30 74.5 – – – – – – 27,360 29,500
100 35 71.5 – – – – – – 21,780 29,500
100 40 68.5 – – – – – – 17,820 25,920
100 50 62.1 – – – – – – 12,780 18,990
100 60 55.4 10,700 16,200 9,630 14,580
100 70 48.2 8,200 12,900 7,380 11,610
100 80 39.9 6,500 10,500 5,850 9,450
100 90 29.9 – – – – – – 4,590 7,830
100 100 14.7 – – – – – – 3,600 6,480
LS–208H