1. The capacities included in the “Duty Cycle Capacities – Angle Boom” chart are the maximum allowable, and are based on crane standing level on firm suporting surface under ideal job conditions. 2. Capacities are based on 75% of minimum tipping loads for drag line, 67.5% for clamshell. 3. Capacities are maximum recommended by PCSA Standard #4. Operator must make allowances for soft or uneven supporting surfaces, rapid cycle operations, bucket suction, or other unfavor able conditions which may require smaller buckets for most efficient operation. 4. Weight of bucket plus load, must not exceed these capacities. 5. Dragline operation is not recommended with boom angles less than 35. 6. Boom length for dragline/clamshell attachment operation should not exceed 100 ft. 7. Retractable high gantry must be fixed in raised position for all capacities on the “Duty Cycle Capacities – Angle Boom” chart. 8. These capacities apply to the machine as originally manufac– tured and normally equipped by Link–Belt Construction Equipment Company. Side Frames Extended – “A” or “AB” Boom Load Boom Counterweight (All capacities listed are in pounds) Length Radius Angle Dragline Clamshell / Magnet (ft) (ft) (deg) “A” “AB” “A” “AB” CTWT CTWT CTWT CTWT 40 8.9 82.0 – – – – – – 29,500 29,500 40 9 81.8 – – – – – – 29,500 29,500 40 10 80.3 – – – – – – 29,500 29,500 40 11 78.9 – – – – – – 29,500 29,500 40 12 77.4 – – – – – – 29,500 29,500 40 13 75.9 – – – – – – 29,500 29,500 40 14 74.5 – – – – – – 29,500 29,500 40 15 73.0 – – – – – – 29,500 29,500 40 16 71.5 – – – – – – 29,500 29,500 40 17 69.9 – – – – – – 29,500 29,500 40 18 68.4 – – – – – – 29,500 29,500 40 19 66.9 – – – – – – 29,500 29,500 40 20 65.3 – – – – – – 29,500 29,500 40 25 57.1 29,500 29,500 29,500 29,500 40 30 48.1 29,500 29,500 28,260 29,500 40 35 37.5 25,100 29,500 22,590 29,500 40 40 23.4 – – – – – – 18,630 26,640 50 10.3 82.0 – – – – – – 29,500 29,500 50 11 81.1 – – – – – – 29,500 29,500 50 12 80.0 – – – – – – 29,500 29,500 50 13 78.8 – – – – – – 29,500 29,500 50 14 77.6 – – – – – – 29,500 29,500 50 15 76.4 – – – – – – 29,500 29,500 50 16 75.3 – – – – – – 29,500 29,500 50 17 74.1 – – – – – – 29,500 29,500 50 18 72.9 – – – – – – 29,500 29,500 50 19 71.7 – – – – – – 29,500 29,500 50 20 70.5 – – – – – – 29,500 29,500 50 25 64.3 – – – – – – 29,500 29,500 50 30 57.7 29,500 29,500 28,170 29,500 50 35 50.6 25,100 29,500 22,590 29,500 50 40 42.7 20,800 29,500 18,720 26,820 50 50 20.9 – – – – – – 13,500 19,710 60 11.7 82.0 – – – – – – 29,500 29,500 60 12 81.6 – – – – – – 29,500 29,500 60 13 80.7 – – – – – – 29,500 29,500 60 14 79.7 – – – – – – 29,500 29,500 60 15 78.7 – – – – – – 29,500 29,500 60 16 77.8 – – – – – – 29,500 29,500 60 17 76.8 – – – – – – 29,500 29,500 60 18 75.8 – – – – – – 29,500 29,500 60 19 74.8 – – – – – – 29,500 29,500 60 20 73.8 – – – – – – 29,500 29,500 60 25 68.8 – – – – – – 29,500 29,500 60 30 63.6 – – – – – – 27,990 29,500 60 35 58.1 25,000 29,500 22,500 29,500 60 40 52.3 20,700 29,500 18,630 26,640 60 50 38.9 15,000 21,900 13,500 19,710 60 60 19.0 – – – – – – 10,260 15,300 70 13.1 82.0 – – – – – – 29,500 29,500 70 14 81.2 – – – – – – 29,500 29,500 70 15 80.4 – – – – – – 29,500 29,500 70 16 79.5 – – – – – – 29,500 29,500 70 17 78.7 – – – – – – 29,500 29,500 Side Frames Extended – “A” or “AB” Boom Load Boom Counterweight (All capacities listed are in pounds) Length Radius Angle Dragline Clamshell / Magnet (ft) (ft) (deg) “A” “AB” “A” “AB” CTWT CTWT CTWT CTWT 70 18 77.9 – – – – – – 29,500 29,500 70 19 77.0 – – – – – – 29,500 29,500 70 20 76.2 – – – – – – 29,500 29,500 70 25 71.9 – – – – – – 29,500 29,500 70 30 67.6 – – – – – – 27,900 29,500 70 35 63.1 – – – – – – 22,320 29,500 70 40 58.4 20,500 29,400 18,450 26,460 70 50 48.1 14,900 21,700 13,410 19,530 70 60 35.9 11,300 16,900 10,170 15,210 70 70 17.6 – – – – – – 7,920 12,150 80 14.5 82.0 – – – – – – 29,500 29,500 80 15 81.6 – – – – – – 29,500 29,500 80 16 80.9 – – – – – – 29,500 29,500 80 17 80.1 – – – – – – 29,500 29,500 80 18 79.4 – – – – – – 29,500 29,500 80 19 78.7 – – – – – – 29,500 29,500 80 20 77.9 – – – – – – 29,500 29,500 80 25 74.2 – – – – – – 29,500 29,500 80 30 70.5 – – – – – – 27,720 29,500 80 35 66.6 – – – – – – 22,140 29,500 80 40 62.7 – – – – – – 18,270 26,280 80 50 54.3 14,600 21,500 13,140 19,350 80 60 44.8 11,100 16,700 9,990 15,030 80 70 33.5 – – – – – – 7,830 12,060 80 80 16.5 – – – – – – 6,120 9,810 90 15.9 82.0 – – – – – – 29,500 29,500 90 16 81.9 – – – – – – 29,500 29,500 90 17 81.2 – – – – – – 29,500 29,500 90 18 80.6 – – – – – – 29,500 29,500 90 19 79.9 – – – – – – 29,500 29,500 90 20 79.3 – – – – – – 29,500 29,500 90 25 76.0 – – – – – – 29,500 29,500 90 30 72.7 – – – – – – 27,540 29,500 90 35 69.4 – – – – – – 21,960 29,500 90 40 65.9 – – – – – – 18,090 26,100 90 50 58.7 14,400 21,300 12,960 19,170 90 60 50.9 10,900 16,500 9,810 14,850 90 70 42.2 8,500 13,200 7,650 11,880 90 80 31.5 – – – – – – 6,030 9,630 90 90 15.5 – – – – – – 4,770 7,920 100 17.2 82.0 – – – – – – 29,500 29,500 100 18 81.5 – – – – – – 29,500 29,500 100 19 81.0 – – – – – – 29,500 29,500 100 20 80.4 – – – – – – 29,500 29,500 100 25 77.5 – – – – – – 29,500 29,500 100 30 74.5 – – – – – – 27,360 29,500 100 35 71.5 – – – – – – 21,780 29,500 100 40 68.5 – – – – – – 17,820 25,920 100 50 62.1 – – – – – – 12,780 18,990 100 60 55.4 10,700 16,200 9,630 14,580 100 70 48.2 8,200 12,900 7,380 11,610 100 80 39.9 6,500 10,500 5,850 9,450 100 90 29.9 – – – – – – 4,590 7,830 100 100 14.7 – – – – – – 3,600 6,480 LS–208H
WORKING RANGE DIAGRAM Maximum Boom Angle See Note 2. 80° 160’ 150’ 60° 70° 150’ 140’ 140’ 130’ 50° 130’ 120’ Height in feet above ground 120’ 110’ 100’ 90’ 80’ 70’ 60’ 50’ 40’ 30’ 10° 20° 30° 40° 110’ 100’ 90’ 80’ 70’ 60’ 50’ 40’ Main Boom Length 20’ Minimum Boom Angle See Note 2. 10’ 0’ 160’ 140’ 120’ 100’ 80’ 60’ 40’ 20’ 0’ Operating radius from centerline of rotation in feet 1. 2. LS–208H
Change language