2013 Owner's Manual - Bear Archery

More documents

Recommendations

Info

CAM ADJUSTMENTS Thread Locked Screws Siren Rotating Module Cam Back View Bolt on third track Cam The Siren rotating module cam is equipped with a bolt on third track system. DO NOT remove the third track for any reason. The screws holding this track on have been set with a thread binding agent and should never be removed. The third track is not changed during any adjustment of this cam. 26
CAM ADJUSTMENTS Adjusting Draw Length – Perimeter Weighted Modular Single Cam Bow model: • Home Wrecker The perimeter weighted single cam has a modular draw length adjustment. Most draw length adjustments can be made without the use of a bow press. Draw length changes are made by simply changing modules and moving the draw stop. Accessory modules are available from your local <strong>Bear</strong> <strong>Archery</strong> dealer in one-inch draw length increments. Each module is numbered, with #10 being the longest draw length and #4 being the shortest. To change modules remove the socket head cap screws from the present module, remove that module and replace with a new module. Such module draw length adjustments will not affect peak draw weight. Modules are right and left hand specific. USE ONLY RH MODULES ON RIGHT HAND CAMS AND LH MODULES ON LH CAMS! When a module is changed, the draw stop must also be moved to the corresponding setting marked on the cam. Draw stop must be positioned so that the side marked “OUT” faces out. 27
Page 1 and 2: 2013 Owner’s Manual Members of th
Page 3 and 4: Congratulations! Your new Bear Arch
Page 5 and 6: ! IMPORTANT PRESS ! ! INFORMATION !
Page 7 and 8: ! SAFETY FIRST ! Targets and Huntin
Page 9 and 10: BOW DIAGRAMS Rocker Pivot Idler Whe
Page 11 and 12: CARE AND MAINTENANCE With proper ca
Page 13 and 14: BOW ADJUSTMENTS Peak Draw Weight Ad
Page 15 and 16: CAM ADJUSTMENTS Adjusting Draw Leng
Page 17 and 18: CAM ADJUSTMENTS H13 Synchronized Hy
Page 21 and 22: TWO SIDED DRAW STOP EXAMPLES #6 Mod
Page 25: CAM ADJUSTMENTS Cable Post String P
Page 29 and 30: CAM ADJUSTMENTS Module number “+
Page 31 and 32: Rotating Module OUTBREAK Draw Weigh
Page 33 and 34: INITIAL BOW SETUP Place arrow firml
Page 35 and 36: INITIAL BOW SETUP 90° Max Place ar
Page 37 and 38: ARROW SELECTION Arrow selection dep
Page 39: Bear Archery Warranty Statement In

2013 Owner's Manual - Bear Archery

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?