Pages 10-13/04 - Coburn
Pages 10-13/04 - Coburn
Pages 10-13/04 - Coburn
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Milking Equipment<br />
36<br />
LIQUID<br />
LEVEL<br />
PROBE<br />
LLRC<br />
CONTROL<br />
MOISTUREPROOF<br />
WATER RESISTANT<br />
Flex<br />
Coupler<br />
Gasket<br />
The Flex-Coupler is a 2” plastic coupler,<br />
complete with bushing and gaskets, for milk<br />
line to receiver jar connections. It works<br />
equally well on glass to glass and glass to<br />
stainless connections. (Not recommended for<br />
stainless to stainless.)<br />
Flex-Coupler’s unique poly complex<br />
construction is durable, sanitary,and easy to<br />
twist apart without breaking the glass line.<br />
Poly expands and contracts naturally over a<br />
wide range of temperatures for optimum seal<br />
and minimal distortion.<br />
J2000 Flex Coupler complete<br />
J20<strong>10</strong> Replacement Gasket<br />
®<br />
Receiver Group<br />
Components<br />
PLASTIC<br />
MOISTURE TRAP<br />
Stock No. Description<br />
175-0018 3-Gallon Molded Plastic Moisture<br />
Trap with S.S. Bend. Wt. 17 lbs.<br />
175-0016 Same Trap without S.S. Bend<br />
Replacement Parts:<br />
175-00<strong>10</strong> Molded Trap Body only<br />
175-0011 4.25” Adapter Sleeve<br />
175-0012 3.75” Adapter Sleeve<br />
175-00<strong>13</strong> 4” Trap Ball<br />
175-0015 Clean out Cap Assembly<br />
175-0017 S.S. Bend only, <strong>13</strong>5˚, 3”<br />
LIQUID LEVEL PROBE &<br />
CONTROL<br />
dual voltage 115/230VAC<br />
BW1615 1.5” Liquid Level Probe<br />
& Control, solid state<br />
BW1620 2” Liquid Level Probe<br />
and Control, solid state<br />
LLP15 1.5” Probe only<br />
LLP20 2” Probe only<br />
LLRC Control only, 115/230VAC<br />
LLRB Replacement board only<br />
EX021892AReplacement board for<br />
other 3-prong controls<br />
EX<strong>10</strong>0592BReplacement board for<br />
Surge 2-prong control<br />
18-Month Limited Warranty<br />
on Control Boards<br />
VACUUM DRAIN VALVE<br />
AVD4 4” Vacuum Operated Drain Valve (As<br />
shown; hose & fittings not included.)<br />
8200020 Repl. Gasket for Drain Valve<br />
COVER<br />
TRAP<br />
BODY<br />
STAINLESS STEEL<br />
Air Blow<br />
Check Valve<br />
J-BENDS<br />
Clamp / Clamp<br />
CLIP<br />
OPTIONAL<br />
DUCKBILL DRAINS<br />
120122<br />
Air Blow Valve is designed to<br />
pressurize lines with air to purge out milk<br />
or CIP solution. Valve is normally closed<br />
and uses air to open. Comes with a 1.0<br />
micron air filter disk and a 3/8”NPT female<br />
air connection. 20 to 60 psi operating range.<br />
Use with 4730-06-99-12 Milk Filter.<br />
623515 Air Blow Check Valve, 1.5”. Wt. 2.5<br />
lbs.<br />
BALL<br />
Clamp / Thread<br />
120124<br />
STAINLESS STEEL<br />
MOISTURE TRAP<br />
Stock No. Size & Type<br />
6QMT 6 qt. Moisture Trap with 2 - 2”<br />
threaded inlets. Wt. 3.25 lbs.<br />
12QMT 12 qt. Moisture Trap with 2 -<br />
3” threaded inlets. Wt. 6 lbs.<br />
Replacement Parts:<br />
6QTB 6 qt. Trap Body<br />
12QTB 12 qt. Trap Body<br />
12QTBX 12 qt. Trap Body without<br />
drainage hole<br />
<strong>10</strong>47 Gasket for 6 qt. Cover<br />
6 3/8” by 7 7/8”<br />
12QMTG Gasket for 12 qt. Cover<br />
7 7/8” by 8 3/4”<br />
MTC20 Cover only for 6 qt. Trap<br />
MTC30 Cover only for 12 qt. Trap<br />
MTB20 Ball only for 6 qt. Trap<br />
(2.5” diameter)<br />
MTB40 Ball only for 12 qt. Trap<br />
(4” diameter)<br />
6QMTCC Cover Clip for 6 qt. Cover<br />
12QMTCC Cover Clip for 12 qt. Cover<br />
120122 Duckbill Drain<br />
120124 Heavy-Duty Duckbill Drain<br />
HORIZONTAL<br />
STAINLESS STEEL<br />
MOISTURE TRAPS<br />
175-0006 12” X 24” Trap complete,<br />
3” clamp X 3”NPT. 29 lbs.<br />
175-0009 12” X 24” Trap, complete,<br />
4” clamp X 4”NPT. 29 lbs.<br />
175-0007 Repl. Gasket, <strong>13</strong>” X 12 1/4”<br />
175-0008 Repl. Lid with Gasket<br />
175-00<strong>13</strong> Repl. 4” Trap Ball<br />
STAINLESS STEEL<br />
MOISTURE TRAP BENDS<br />
Stock No. Size & Type<br />
20JFT 2” J-Bend, clamp & thread<br />
30JFT 3” J-Bend, clamp & thread<br />
20JCC 2” J-Bend, clamp/clamp<br />
30JCC 3” J-Bend, clamp/clamp<br />
30UCC 3” U-Bend, clamp/clamp<br />
30UWW 3” U-Bend, weld/weld<br />
175-0014 4” U-Bend, clamp/clamp<br />
CC21-2020 2” Adapter, clamp/thread<br />
CC21-3030 3” Adapter, clamp/thread<br />
Clamp / Clamp Weld / Weld<br />
U-BENDS<br />
CUSTOMIZED<br />
RECEIVER<br />
GROUPS<br />
Call 800-776-7<strong>04</strong>2<br />
or e-mail<br />
info@coburn.com to<br />
request a Worksheet<br />
9<br />
12<br />
6<br />
TOP<br />
VIEW<br />
3<br />
SIDE VIEW<br />
1) Wall mount or floor mount?<br />
2) What is your desired jar capacity?<br />
3) Number, size and location of inlets? Straight<br />
or angled? Welded or ferruled? Set discharge<br />
at 3:00 and indicate location in terms of the<br />
hours on a clock face.<br />
4) Size and location of vacuum inlet? Straight<br />
or angled? Welded or ferruled?<br />
5) Cover size? Probe hole size? Liquid level<br />
control & size?<br />
6) Is a vacuum operated drain valve needed?<br />
7) What size milk pump? Vertical or horizontal<br />
discharge? Motor size?<br />
800-776-7<strong>04</strong>2 Quality and Service Since 1925 www.coburn.com<br />
4"