A Guide to Safe and Effective Tank Cleaning

Fluid Driven
Reactionary Force 25'
(7.6 m)
Max. Tank Diameter
Fluid Driven
Tank Washing Nozzles
Features and Benefits
• Ideal for rinsing tanks, vessels and containers up to 25'
(7.6 m) in diameter
• Especially suited for CIP systems – no motor source
is needed due to the reactionary force of the cleaning liquid
to rotate the spray head
• Low pressure for cleaning and rinsing applications
• Long-life material of construction – corrosion- and
chemical-resistant PTFE fluoropolymer resin
27500
• 27500R nozzles in 1/2" and 3/4" inlet connections are
available in carbon-filled PTFE for improved thermal
characteristics and higher mechanical strength over
the standard material PTFE
• Spray angles range from 180° to 360° to meet most
application needs
27500R
• 27500R has a rotating spray head that can be easily
removed from the body for inspection and maintenance
• To optimize performance of the rotating spray head,
use liquid free of debris
Some 27500R sizes available in
carbon-filled PTFE
Specifications
Max. tank dia.: 25' (7.6 m)
Flow rate range:
Pressure range:
Max. operating temp.:
Min. tank opening size:
Spray coverage:
Inlet connection 27500:
4 to 391 gpm (15.3 to 1490 l/min)
10 to 50 psi (.7 to 3.5 bar)
200°F (93°C)
2" to 7" (51 to 178 mm)
depending on capacity size
180° spraying up or down,
270° spraying up or down
and 360°
1/2" to 3" NPT or BSPT
Inlet connection 27500R: 1/2" to 1" NPT or BSPT
Typical Applications
• Cleaning Broke Chests
27500 PTFE nozzles are an
ideal solution for cleaning liquid
and pigment material from
broke chest ceilings at a pulp
and paper mill.
• Cleaning PCB Washers
27500 nozzles are
used to clean
wash units in the
manufacture of
printed circuit boards.
22 1.800.95.SPRAY | Intl. 1.630.665.5000 | www.spray.com