SKF Maintenance and Lubrication Products

Analysis power without complexity
SKF MicroVibe P kit CMVL 3860-ML
Assess machine condition easily and analyse problems quickly with this versatile
and easy-to-use pocket tool. The economical vibration module fits in a Pocket
PC’s compact flash card slot (CF Type II).
The SKF MicroVibe P collects and displays overall vibration readings and
automatically provides expert judgment of the measured velocity and overall
enveloped acceleration levels, enabling immediate, accurate and reliable
assessment of machine or bearing condition.
Pocket PC not included
Furthermore, the SKF MicroVibe P comes with
analysis capabilities, including cursor position
readout with display zoom to optimize your
analysis power. In addition, it automatically
tabulates and displays the highest vibration
peaks from a spectrum, making it easy to
quickly identify signals indicative of specific
machine problems, like misalignment,
imbalance, or bearing faults.
The MicroVibe P CMVL 3860-ML features
• Pocket PC platform with user–friendly
Windows Mobile Operating System
• Displays overall vibration, time–waveform,
FFT spectrum analysis and early indication
of bearing degradation
• Ideal for small route data collection
• Stores and recalls up to 2 000 overall
vibration signals, 1 000 FFT spectrums and
200 time waveform for more focused
analysis and trending
• Enables Pocket PC users to upload overall
scalar and spectral data to PC for trending
and further analysis with included data
management software
Basic condition monitoring – Ultrasonic leak detector and SKF MicroVibe P
Easy detection of high frequency sounds
Inspector 400 Ultrasonic Probe CMIN 400-K
The Inspector 400 Ultrasonic Probe senses high frequency sounds produced by
operating equipment, as well as leaks and electrical discharges. It electronically
translates these signals by a heterodyning process, making them audible, so
that a user can hear these sounds through a headset and see them as intensity
increments on a meter.
• Detects pressure and vacuum leaks, including compressed air
• Checks steam traps and valves quickly and accurately
• Detects arcing, tracking and corona in electric apparatus
• Tests bearings, pumps, motors and compressors
• Frequency response: 20–100 kHz (centred at 38–42 kHz)
• Indicator: 10-segment LED bar graph (red)
For additional information, please refer to our publication 10549 EN.
105