Sony DSR-570 - Best Broadcast Hire, BBH

2-6. Operating the Unit without Loading
a Cassette Tape
1. Turn off the power switch.
2. Remove the right side panel and remove the ES-26/26P
and DPR-141B boards. (Refer to Section 2-9-4.)
3. Remove the screw (B2.6 x 4) and remove the dustproof
sheet. (Refer to Section 2-9-8.)
4. Set the SLACK DETECTION ON/OFF switch
(S500-4/SV-213 board) to off.
5. Attach the ES-26/26P and DPR-141B boards to the
unit.
6. Remove the left panel and cassette compartment lid.
(Refer to Section 2-2-1.)
7. Disconnect the connector CN1 from the CC-68 board.
8. Turn on the power switch.
9. Operate the unit with the desired tape transport buttons
at the top.
CC-68 board
CN1
Cassette compartment
n
Set the SLACK DETECTION ON/OFF switch (S500-4 /
SV-213 board) to on, after operation.
2-12
DSR-570WS/570WSP V1