Sony DSR-570 - Best Broadcast Hire, BBH

2-9-2. FP-99 Board
1. Open the right panel. (Refer to Section 2-2-2.)
2. Disconnect the flat cable (CN801) and the three
connectors (CN802, CN803, and CN804) from the FP-
99 board.
3. Remove the three screws (B2 x 3) and remove the FP-
99 board.
4. Return the board to its original position with the
reverse procedures of removal.
FP-99 board
CN-801
CN804
Screw
B2 x 3
Screw
B2 x 3 Screw
B2 x 3
CN802
CN803
2-9-3. GCN-16 and SW-929 Boards
1. Remove the right panel. (Refer to Section 2-2-2.)
2. Disconnect the two connectors (CN802 and CN804)
from the FP-99 board.
3. Remove the three screws (B2.6 x 4) and remove the
GCN-16 board.
4. Disconnect the a connector (CN101) from the SW-929
board.
5. Remove the screw (B2.6 x 4) and remove the SW-929
board together with bracket.
6. Remove the screw (B2 x 3) and remove the SW-929
board.
7. Return the board to its original position with the
reverse procedures of removal.
SW-929 board
CN101
Screw B2 x 3
SW-929 board
bracket
Screw
B2.6 x 4
Screws
B2.6 x 4
GCN-16 board
CN802
CN804
FP-99 board
Right panel
2-16
DSR-570WS/570WSP V1