Firestone Air Springs Catalog - MRO Stop
Firestone Air Springs Catalog - MRO Stop
Firestone Air Springs Catalog - MRO Stop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Buy Online at http://www.mrostop.com/products/pneumatics/air-springs/firestone-air-springs.html<br />
1T12E-3<br />
Style<br />
1T12E-3<br />
Two<br />
Ply<br />
Bellows<br />
Description<br />
Blind nuts, 1/4 NPT<br />
Socket head aluminum bead<br />
ring (bolts, nuts, washers not<br />
included, use cap screws)<br />
Assembly Order No.<br />
WO1-358-8119<br />
WO1-358-8118<br />
Assembly weight ........................................................ 3.5 lbs.<br />
CONSULT FIRESTONE<br />
BEFORE USING AS<br />
AIRMOUNT<br />
15<br />
14<br />
Do not use <strong>Air</strong>stroke in<br />
shaded area without<br />
consulting <strong>Firestone</strong><br />
RECOMMENDED<br />
AIRMOUNT<br />
DESIGN HEIGHT<br />
10.5 INCHES<br />
Recommended<br />
Design Position Static<br />
Pressure 0-100 psi<br />
Static Data<br />
9232<br />
15<br />
14<br />
M-8 x 1.25<br />
BLIND NUTS<br />
16 mm DEEP<br />
1/4 BSP<br />
AIR INLET<br />
13<br />
12<br />
Volume<br />
100 Psig<br />
13<br />
12<br />
11<br />
11<br />
M8=25 Nm<br />
TORQUE<br />
M12=35 Nm<br />
TORQUE<br />
44 mm<br />
127 mm MAX O.D.<br />
AT 7 BAR<br />
114 mm DIA.<br />
HEIGHT<br />
VOLUME CU IN. x 10<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
120 Psig<br />
100 Psig<br />
80 Psig<br />
60 Psig<br />
10<br />
9<br />
8<br />
7<br />
6<br />
5<br />
FORCE LBS x 100<br />
M12 x 1.75<br />
THREADED HOLE<br />
(25 mm DEEP)<br />
111 mm DIA.<br />
121 mm<br />
4<br />
3<br />
2<br />
40 Psig<br />
20 Psig<br />
4<br />
3<br />
2<br />
NOTE: Bellows will not compress properly with less<br />
than 10 PSIG internal pressure.<br />
NOTE: A bead plate part is shown. This part is also<br />
available with a bead ring. Bolts are not included.<br />
See pages 8-10 for explanation.<br />
Dynamic Characteristics at 10.5 in. Design Height<br />
(Required for <strong>Air</strong>mount isolator design only)<br />
Volume @ 100 PSIG = 89 in 3<br />
Gage<br />
Spring<br />
Pressure Load Rate<br />
(PSIG) (lbs.) (lbs./in.)<br />
Natural<br />
Frequency<br />
CPM<br />
HZ<br />
40 290 53 81 1.35<br />
60 450 75 77 1.28<br />
80 600 91 73 1.22<br />
100 770 114 72 1.21<br />
1<br />
0<br />
MAX. HT.<br />
15 14 13 12 11 10<br />
HEIGHT IN.<br />
0<br />
MIN. HT.<br />
9 8 7 6.2<br />
See page 12 for instructions on how to use chart.<br />
Force Table (Use for <strong>Air</strong>stroke actuator design)<br />
Volume<br />
Pounds Force<br />
Assembly @ 100<br />
Height PSIG @20 @40 @60 @80 @100<br />
(in.) (in 3 ) PSIG PSIG PSIG PSIG PSIG<br />
13.0 110 130 280 440 580 740<br />
12.0 102 130 280 450 600 760<br />
11.0 94 140 280 450 600 760<br />
10.0 85 150 290 450 600 770<br />
9.0 77 150 290 450 600 770<br />
8.0 69 170 310 460 610 760<br />
7.0 60 270 420 580 750 920<br />
1<br />
Buy Online at www.<strong>MRO</strong><strong>Stop</strong>.com<br />
87
Change language