Technical Manual UK.indd - CTC
Technical Manual UK.indd - CTC
Technical Manual UK.indd - CTC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Montageplatte<br />
Adressierung<br />
Jumper<br />
Einstellungen<br />
Rufton-Abschalter<br />
electronic<br />
Inphone BUS-SYSTEM<br />
Installation surface<br />
Closed<br />
Open<br />
INPHONE<br />
HT 522<br />
BUS<br />
Response<br />
RU= Residence Unit (with HT 522)<br />
one address assigned to each RU<br />
RU Name Matrix Address<br />
8 7 6 5<br />
4 3 2 1 low<br />
8 7 6 5 4 3 2 1<br />
a b<br />
1<br />
2<br />
3<br />
R1;C1<br />
R1;C2<br />
R1;C3<br />
Floor<br />
4<br />
R1;C4<br />
~<br />
5<br />
6<br />
7<br />
8<br />
R2;C1<br />
R2;C2<br />
R2;C3<br />
R2;C4<br />
Additional bell system<br />
Control by means of additional<br />
9<br />
10<br />
11<br />
12<br />
R3;C1<br />
R3;C2<br />
R3;C3<br />
R3;C4<br />
BZP BUS contact<br />
13<br />
14<br />
15<br />
16<br />
R4;C1<br />
R4;C2<br />
R4;C3<br />
R4;C4<br />
JUMPER<br />
Einstellungen<br />
Settings<br />
Call sound/<br />
doorstation<br />
Jumper<br />
Melody 1<br />
=<br />
= or =<br />
Melody<br />
Melody<br />
2<br />
3<br />
Address<br />
Melody 4<br />
Jumpers not lost<br />
= in this way<br />
Call sound/ floor<br />
Jumper<br />
Melody 1<br />
LOW<br />
HIGH<br />
2 1<br />
8 7 6 5<br />
RING<br />
Melody 2<br />
MEL<br />
4 3 2 1<br />
Example<br />
1<br />
Socket strip<br />
2 1<br />
high<br />
RING<br />
MEL<br />
Address=<br />
Door=<br />
Floor=<br />
Sound volume=<br />
3<br />
Melody 3<br />
Melody 2<br />
high<br />
Call tone shutting off<br />
Important instructions !<br />
The receiver will have to be on hook during the call by the<br />
doorstation.<br />
If this is not the case, there could be misinterpretation especially<br />
during the activation of the appliance.<br />
This function aims at preventing sounds from the door when the<br />
receiver is not properly set on hook.<br />
The floor key line should be installed at a minimum distance of 3<br />
meters away from the Bus line. Floor key line polarity (terminals 3<br />
and 4) should not be crossed at a parallel connection of two<br />
inphones.<br />
Sound volume/ Call tone<br />
Press both keys simultaneously<br />
for at least 3 seconds.<br />
Pause tone follows on.<br />
OPEN call tone<br />
CLOSED call tone<br />
5<br />
5
Change language