Product News - Bauernfeind GmbH
Product News - Bauernfeind GmbH
Product News - Bauernfeind GmbH
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BAUERNFEIND<br />
The Austrian Pipe Producer<br />
<strong>Product</strong> <strong>News</strong><br />
Spring 2011<br />
pipes are going to be ÖNORM EN 13476-3 certified<br />
SN12<br />
SN12<br />
PP-MEGA-Pipe SN12<br />
3 mm<br />
inner wall thickness<br />
from DN / ID 150 mm<br />
PP-MEGA-Drain SN12<br />
SN16<br />
SN16<br />
PP-MEGA-Pipe SN16<br />
PP-MEGA-Drain SN16<br />
Drainage pipe perforation<br />
All drainage pipes of<br />
the <strong>Bauernfeind</strong> company<br />
are produced<br />
with the new perforation.<br />
5 mm<br />
perforation from<br />
DN/ID 150 mm<br />
Version: EN-RF01_20110214<br />
We, the only Austrian producer of double composite corrugated pipes<br />
from DN / ID 100 – 1200 mm, would be glad to make an offer free of<br />
charge for your next project.<br />
www.bauernfeind.co.at
PP-MEGA-Pipe<br />
SN12 or SN16<br />
Double composite corrugated pipes made of<br />
polypropylene outside corrugated – inside smooth<br />
DN/ID* 150 - 1200 mm<br />
approx. 6 m pipe with socket and sealing ring<br />
Range of application:<br />
• road- and motorway construction<br />
• sewage and rainwater drain<br />
• industrial and commercial construction<br />
• alpine and forest road construction<br />
• house and stable building<br />
SN12<br />
SN16<br />
NEW<br />
Spring 2011<br />
from<br />
3 mm<br />
inner wall thickness<br />
from DN / ID 150 mm<br />
Strengthened inner layer<br />
For higher loading<br />
3,5<br />
3,0<br />
The wall thickness of the smooth<br />
inner layer is 3 mm<br />
Diagrammtitel<br />
Comparison of inner wall thickness<br />
2009 Mr. Dipl.-Ing. Karl Rohrhofer, civil engineer for environmental<br />
engineering and water management, wrote a letter to<br />
the GRIS – association to sustain constant quality of pipes in<br />
settlement water engineering. In this letter he wrote that a<br />
minimum wall thickness of 3 mm is necessary at an operating<br />
period of 50 – 100 years. Then there was a personal<br />
meeting between Mr. <strong>Bauernfeind</strong> and Mr. Dipl.-Ing. Karl<br />
Rohrhofer where he clearly expressed his opinion that a<br />
minimum of 3 mm would be ideal.<br />
Inner wall thickness in mm<br />
2,5<br />
2,0<br />
1,5<br />
1,0<br />
0,5<br />
0,0<br />
2,3<br />
2,0<br />
1,7<br />
1,5<br />
1,1<br />
1<br />
150 200 250 300 350 400<br />
Pipe dimensions DN/ID in mm<br />
PP-MEGA-Rohr SN12 und SN16 Anforderungen ÖNORM EN 13476-3<br />
Requirements of ÖNORM EN 13476-3<br />
PP-MEGA-Pipe SN12 and SN16<br />
With this knowledge, the <strong>Bauernfeind</strong> company has decided<br />
to produce the new PP-MEGA-Pipes and Drainage pipes<br />
in SN12 and SN16 with an inner wall thickness of minimum<br />
3 mm. Due to the strengthened inner layer the operating<br />
period of the pipes is longer. Especially for pipelines under<br />
high loading through boulder, gravel, sand or suchlike, it is an<br />
advantage compared with conventional corrugated pipes. With<br />
3 mm inner wall thickness it is no longer a problem to clean<br />
the pipeline with high pressure cleaner or with cleaning chain.<br />
The cleaning instructions of Mr. Dipl.-Ing. Karl Rohrhofer is in<br />
preparation. (Cleaning test of the pipeline is in work).<br />
Pipes with DN/ID 250, 300 and 400 mm are already in stock.<br />
We plan to be able to deliver all other dimensions by the end of<br />
April. Convince yourself of the quality of our product<br />
innovation.<br />
*) **) nominal nicht erhältlich diameter / in: internal Deutschland, diameterFrankreich,<br />
Spanien, Großbritannien, Italien,<br />
Niederlande, Schweden
PP-MEGA-Drain<br />
SN12 or SN16<br />
Double composite corrugated pipes made of<br />
polypropylene outside corrugated – inside smooth<br />
DN/ID* 150 - 1200 mm<br />
approx. 6 m pipe with socket and sealing ring<br />
SN12SN16<br />
3 mm<br />
inner wall thickness<br />
from DN / ID 150 mm<br />
Range of application:<br />
• Road- and motorway construction<br />
• tunnel- and railway construction<br />
• dumpsite construction<br />
• drainage of leanings, etc.<br />
NEW perforation<br />
In an international research project at the<br />
Institute for pipeline construction at the<br />
University of Applied Sciences Oldenburg,<br />
test experiments for the cleaning of drains<br />
were carried out. The result showed that the<br />
best cleaning is achieved with a perforation<br />
width of 5 mm.<br />
The 5 mm perforation width has been<br />
approved particularly by cleaning pipes in<br />
motorway tunnels, so the comment of<br />
Mr. Taferner, expert of the European Pipeline<br />
Center. Now at every new building project of<br />
street tunnel and the Austrian Railway a minimum<br />
perforation width of 5 mm is required.<br />
For this reason, we adjust the perforation<br />
width of our drainage pipes to the latest<br />
standards of pipeline construction. In addition<br />
to a better cleaning of drainage pipes it brings<br />
new benefits such as higher water absorption.<br />
Since this year we can offer a wide range of<br />
drainage pipes. Beside the high quality<br />
PP-MEGA-Drain in SN8, SN12 or SN16 we<br />
still produce our standard drainage pipe<br />
PP-WELL-Drain SN8.<br />
perforations<br />
schematic drawings<br />
1/3 2/3 3/3<br />
advantages:<br />
1/3 perforation<br />
wall thickness – the wall thickness of the smooth<br />
inner layer is minimum 3 mm. Therefore higher<br />
abrasion resistance is ensured.<br />
Perforation width – from the pipe dimension DN/ID<br />
150 the minimum perforation width is 5 mm. Therefore<br />
higher water absorption is ensured.<br />
ring stiffness – extremely high stability of the pipe<br />
through the ring stiffness SN12 or SN16<br />
impact resistance – the high impact resistance of the<br />
drainages allows to fill the trench with gravel faster. This<br />
will help to prevent damage by incorrect installation.<br />
2/3 perforation 3/3 perforation<br />
5 mm<br />
perforation
0 72 77 / 25 98 - 20<br />
PP-MEGA-Pipe<br />
Double composite corrugated pipes made of polypropylene<br />
DN/ID 100 - 1200 mm<br />
approx. 6 m pipe with socket and sealing ring<br />
SN8<br />
SN8<br />
ÖNORM EN<br />
13476-3<br />
certified<br />
Range of application:<br />
• road- and motorway construction<br />
• sewage and rainwater drain<br />
• industrial and commercial construction<br />
• alpine and forest road construction<br />
• house and stable building<br />
PP-MEGA-Drain<br />
DN/ID 100 - 1200 mm<br />
SN8<br />
approx. 6 m pipe with socket and sealing ring<br />
Range of application:<br />
• Road- and motorway construction<br />
• drainage of leanings<br />
• house construction and basement drainage<br />
• grasslands and fields, etc.<br />
SN8<br />
5 mm<br />
perforation from<br />
DN/ID 150 mm<br />
manholes<br />
suitable for all pipes of the series: PP-MEGA and PP-WELL<br />
Symbolfotos!<br />
PP-manhole DN 400 PP-MEGA-manhole plastic manhole concrete manhole<br />
further in program:<br />
PP-WELL-Drain PVC-pipe cableprotection pipe PE-pressuretube rails<br />
Irrtum, Druck- und Satzfehler vorbehalten!<br />
more information to our products: www.bauernfeind.co.at!<br />
›› <strong>Bauernfeind</strong> <strong>GmbH</strong>, Gewerbepark 2, A-4730 Waizenkirchen, Tel.: +43 (0) 72 77 / 25 98 - 20 Fax: DW - 25 ‹‹<br />
We deliver only according to our conditions of sale and delivery.