9840 Tape Drive User's Reference Manual - Shrubbery.net
9840 Tape Drive User's Reference Manual - Shrubbery.net
9840 Tape Drive User's Reference Manual - Shrubbery.net
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CSL Operator Panel Switches<br />
■ CSL Operator Panel Switches<br />
The CSL operator panel switches (Figure 2-4) are described in this section.<br />
Note: Refer to Figure 2-1 on page 2-1 to see the standard operator panel and<br />
explanation of its switches.<br />
Figure 2-4. CSL Operator Panel<br />
1 2 3 4 5 6 7 8 9<br />
service<br />
10 11 12 13 14 15<br />
1. Power Indicator<br />
2. Activity Indicator<br />
3. Clean Indicator<br />
4. Service Indicator<br />
5. IPL Switch<br />
6. Operator Indicator<br />
7. System Indicator<br />
8. Automatic Indicator<br />
9. <strong>Manual</strong> Indicator<br />
10. Unload Switch<br />
11. Menu Switch<br />
12. Select Switch<br />
13. Operator Display<br />
14. Start Switch<br />
15. Autoload Mode Switch<br />
C53362<br />
Note: The IPL, Unload, Menu, and Select switches are identical to the switches<br />
located on the standard operator panel. They are not covered in this<br />
section. Only the CSL Autoload Mode and Start switches are covered.<br />
Autoload Mode Switch<br />
The Autoload Mode switch changes the operation of the CSL to one of three<br />
modes: System, Automatic, or <strong>Manual</strong>.<br />
The CSL powers on in the default mode selected in the drive configuration<br />
menu. The default mode is overridden when the switch is used to select a new<br />
setting. The CSL remains in the selected mode while the drive is powered on.<br />
This does not change the IPL default mode in the drive configuration menu.<br />
System Mode It allows the host to control CSL.<br />
Autoload ModeIt allows the CSL to operate automatically.<br />
<strong>Manual</strong> Mode It allows manual operations only.<br />
95739 Ninth Edition 2-7