introduction - Cutters Edge
introduction - Cutters Edge
introduction - Cutters Edge
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SET-UP<br />
GUIDEBAR AND DIAMOND CHAIN INSTALLATION<br />
STEP 1<br />
Loosen side cover nut and remove side cover.<br />
STEP 3<br />
Mount the diamond chain on the guidebar<br />
starting at the drive sprocket and continue over<br />
the guidebar nose.<br />
STEP 2<br />
Place bar onto stud and engage alignment block.<br />
STEP 4<br />
Install the side cover and ensure chain<br />
adjustment pin engages hole in bar. Do not fully<br />
tighten side cover nut until after chain is<br />
properly tensioned.<br />
6