TK 429V

More documents

Recommendations

Info

14 Machining centres for panels TK 429V Panel clamping system equipped with a vacuum base The vacuum base is made up of aluminum extruded beams (230 x 2000 mm) that can automatically be activated/deactivated by opening and closing the valves. On the beams Forex panels are mounted: these panels are semi-expanded PVC sheets. Since these sheets are made of porous material, they provide a uniform airflow distribution across the panel area thereby creating an efficient suction effect on the whole surface of the working table. Moreover, Forex material offers such characteristics as robustness, an excellent shock resistance, vibration damping during operation and resistance to penetration of the residual lubricating liquid. The vacuum anchoring system is turned on by a suction device whose lateral channel blowers (A-B) ventilate each a different machine area. A CNC-controlled mechanism regulates the airflow through the beams of the vacuum base and enables to concentrate the suction on one area, as well as to decide which tables will perform the clamping. After the operator selects the tables to be activated from the monitor, the milling head moves along the X axis; during this first stroke the system opens the valves of the beams that are to be used, while it closes other valves. L = 6500 mm B A B A 1 2
Machining centres for panels 15 TK 429V The first 7 beams are positioned at the operator’s side (for a total area of 1610 x 2000 mm) and are equipped with a double vacuum chamber; this allows to activate/deactivate areas with minimal dimensions of 230 x 1000 mm in order to optimize the clamping efficiency on small elements. L = 6500 mm A 1
Page 1 and 2: Technical Specification TK 429V Mac
Page 3 and 4: Machining centres for panels TK 42
Page 11 and 12: Machining centres for panels 11 TK
Page 13: Machining centres for panels 13 TK
Page 17 and 18: Machining centres for panels 17 TK
Page 19 and 20: Optional Machining centres for pane
Page 21 and 22: Optional Machining centres for pane
Page 23 and 24: Software Machining centres for pane
Page 25 and 26: Software Machining centres for pane
Page 27 and 28: Optional software Machining centres

TK 429V

Create successful ePaper yourself

Delete template?

Save as template?