Selux - SM Lys

LIGHTING CONTROL
PHOTOMETRIC DATA
Given the growing number of requirements a lighting installation is
expected to meet nowadays with respect to the quality of the light
and energy efficiency, lighting control is becoming increasingly
important.
State-of-the-art lighting installations include:
> Complete integration of all light sources (incandescent lamps,
halogen lamps, fluorescent lamps, energy-saving lamps, highpressure
lamps and LEDs)
> Capability to dim all light sources that are dimmable
> Convenient recall of pre-programmed light scenes
> Flexible fade in and out times between light scene transitions
> Integration of light scenes into sequences and timed
sequences
> Integration of daylight, presence detectors
> Remote controlled spotlights
> Control of light colour possibilities
> Remote operation
> Interoperability with existing facility management systems
that integrate all possible control systems
> Lamp failure feedback
> Simple, intuitive operation
The EUTRAC|DALI lighting control system fulfills all these requirements.
Originally designed for use with tracks, this system has been
developed to become universally applicable. The advantage benefits
installations with or without track – always handled in the same
uncomplicated manner.
The following components represent a selection of the most
important EUTRAC|DALI products available. You will find a more
complete overview at www.eutrac.de.
Goniophotometer at the Semperlux headquarters in Berlin
LightComposer ® Adaptor
LightComposer ® REG
Lichtstärkeverteilung
135°
135°
For use with the EUTRAC|DALI system in
an adaptor housing, can be positioned
anywhere along the EUTRAC|DALI 3~track
with data bus, with IR interface for remote
control and status LEDs.
DALI digital light controller module that
includes additional timing system.
300
120°
200 cd/klm
105°
90°
75°
60°
45° 45°
C0-C180 C90-C270
120°
DATA 3042
105°
T16 / T5
90°
75°
LOR 63%
60° u 87%
UGR