ITEC-MULTIMIX 8/4 digital - Hardware
ITEC-MULTIMIX 8/4 digital - Hardware
ITEC-MULTIMIX 8/4 digital - Hardware
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>MULTIMIX</strong> 8/4 DIGITAL<br />
Configuration change with BCD coded switch:<br />
BCD switch<br />
9) Interface for media remote control:<br />
9-pole Submin-D plug on the housings rear panel, called ”RS-232 Remote“.<br />
Settings:<br />
Baud rate: 19200 Parity: none<br />
Data bits: 8 Stop bits: 1<br />
2 RXT<br />
3 TXT<br />
5 GND<br />
7<br />
8<br />
Attached to the software description you will find the communication protocol between the<br />
MultiMix and a media remote control.<br />
10) Digital Link:<br />
<strong>Hardware</strong> 1.0 to 2.0: Cinch sockets on the housings rear panel, called ”SERIAL LINK“<br />
Prepared for e.g. multi-channel auto-mixing or other master-slave combinations in software<br />
versions to come.<br />
11) Analog Link:<br />
RJ-45 sockets on the housings rear panel, called ”LINK OUT“, ”LINK IN“.<br />
Serves the cascading of several devices, by linking the Bus to each consecutive device. The<br />
connection is made by cable MM-RJ-0.5, each from one device’s Link-out to the next<br />
device’s Link-in.<br />
11<br />
www.itec-audio.com <strong>MULTIMIX</strong> 8/4 DIGITAL
Change language