TWO SHAFT GAS TURBINE UNIT - Solution Engineering

SOLTEQ ®
Equipment for Engineering Education & Research
TWO SHAFT GAS TURBINE UNIT
MODEL: TH 20
T
HE Two Shaft Gas Turbine Unit (Model : TH 20) is offered as a fully two shaft machine with built in starting
equipment, power absorption system and data acquisition option. It provides the means for carrying out
an extensive programme of experiments in gas turbine technology using the instrumentation provided. All
instrumentation and controls are carried on the panel which displays the flow diagram with a clear indication of all
measurements identified by symbols.
DESCRIPTION
The Two Shaft Gas Turbine employs a centrifugal compressor
and a radial turbine, arranged back to back on
a common shaft. Together with a gas-fuelled combustion
chamber operating on LPG, these will form the gas
generator. Gases from the gas generator turbine pass
to the power turbine which is a radial machine of larger
size and then to exhaust. The power turbine is loaded
by a dynamometer system to absorb the power output
and measure the power turbine torque. Starting is effected
by an electrically driven auxiliary air blower, incorporated
within the unit an delivering into the eye of
the compressor, which accelerates the compressor/
Rev1.0 21/06/2011

SOLTEQ ®
Equipment for Engineering Education & Research
turbine initially and assists it until self-sustaining speed
is reached after light-up. There is a water cooled lubrication
system for both the compressor/turbine and the
power turbine incorporating an electrically driven pump,
filter, oil cooler and reservoir.
FEATURES
• Self-contained complete teaching facility
• Designed for safe easy operation with low noise
levels
• Data acquisition option available for all measured
variables
• Comprehensive controls and instrumentation displayed
in multi-colour flow diagram
EXPERIMENTAL CAPABILITIES
Allows an extensive programme of experiments in Gas
Turbine technology including:
i) Understanding functions and operations of a gas
turbine
ii) Determination of shaft power and fuel consumption
iii) Performance of a two shaft unit
iv) Investigation of characteristics of individual components
• gas generator compressor
• combustion chamber characteristics
• power turbine characteristics
TECHNICAL SPECIFICATIONS
Two Shaft Gas Turbine Unit on self contained movable
stand comprising single shaft compressor/turbine unit
combustion chamber for operation on LPG, power turbine,
calibrated electrical machine for torque and power
measurement, ignition system, oil tank, circulating pump,
cooler and filter, instrument panel with flow diagram, fitted
inlet air flow gauge, fuel variable area flow meter,
tachometers (2), multi point thermocouple instrument,
sensitive pressure gauges, manometer, oil pressure
gauge and fuel supply pressure gauge. Complete with
starting air compressor set and all controls.
SOLTEQ
The unit shall be fitted with necessary electronic sensors
to ensure compatibility with optional data acquisition.
It shall consist of the following:-
Temperature (7)
Pressures (5)
Flow rates (2)
Speeds (2)
Alternator power
OPTIONAL ITEMS
: T1 air inlet
: T2 compressor exit
: T3 combustion chamber exit
: T4 power turbine inlet
: T5 power turbine outlet
: T6 fuel
: T7 oil
: P1 oil
: P2 fuel
: P3 gas generator inlet
: P4 power turbine inlet
: P5 combustion chamber pressure
loss
: Air
: Fuel
: Gas generator
: Power turbine
-DAS
SOLDAS DATA ACQUISITION SYSTEM
i) A PC with latest Pentium Processor
ii) An electronic signal conditioning system
iii) Stand alone data acquisition modules
iv) Windows based software
• Data Logging
• Signal Analysis
• Process Control
• Real-Time Display
• Tabulated Results
• Graph of Experimental Results
Rev1.0 21/06/2011

SOLTEQ ®
Equipment for Engineering Education & Research
- CAL
SOLCAL COMPUTER AIDED LEARNING SOFTWARE
i) Interactive multimedia features
ii) Graphical simulation
iii) Experiment results samples
iv) Full experiment manuals
REQUIREMENTS
Electrical supply : 430 VAC/50 Hz/3 phase
Fuel supply : LPG (4 bar)
in standard 50kg tanks
Water supply : 200 L/hr
OVERALL DIMENSIONS
Height : 1.80 m
Width
: 1.00 m
Length : 1.50 m
MANUALS
The unit is supplied with Operating and Experiment
Manuals in English giving full descriptions of the unit,
summary of theory, experimental procedures and typical
experimental results.
SOLTEQ
Rev1.0 21/06/2011

SOLTEQ ®
Equipment for Engineering Education & Research
SOFTWARE & E-LEARNING
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
®
SOLDAS - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experiment Results
®
SOLCAL - Computer Aided Learning
- Multimedia Features
- Interactive
- Graphic Simulation
- Samples of Experiment Result
- Full Experiment Manuals
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.
(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,
47100 Puchong, Selangor Darul Ehsan, Malaysia.
Tel. No. : +(603) 80758000
Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,
Bukit Jalil, 57000 Kuala Lumpur, Malaysia.
Tel. No. : +(603) 8996 0023
Email : solution@solution.com.my
Web site : http//www.solution.com.my/
AGENT:
BUATAN MALAYSIA
MSC- Status
Company
Rev1.0 21/06/2011