Download in PDF format - ATS

The Independent Solution Provider for Industrial and Process Automation, Quality & IT
What's New in ATS Inspect 5.5
www.ats-inspect.com
8. Default Concern/Repair Relationships
A simple change was made to this dialog. A new checkbox labeled "Automatically add Repairs to
existing Concerns" was added. If this checkbox is checked, then dragging over a new repair to a
concern will result in that repair being added to every part/concern combination for the selected
concern.
9. Add Code to Checklist Questions
A new Code field was added to each question. It will be used in a future version of Inspect to allow
for easier updates of a checklist question for a unit by external processes.
10. Auto Logoff Timeout
If Auto Logoff is enabled for a Data Collect or Auditor station, the timeout is now measured in
seconds, not minutes. This was done to allow for a smaller minimum logoff time of 30 seconds as
opposed to the existing 5 minutes. The auto-logoff timeout property now uses a slider control instead
of a spin control to set the value since the range (30 to 21600) is so large. To move the timeout
value in small, single step increments, use the left and right cursor keys (with the focus set to the
slider control).
11. Dynamic Validation for Numeric Checklist Questions
Dynamic validation for number value questions has been added. It works exactly the same as it does
for Text questions except that the database lookup must return two values – minimum and maximum
acceptable value.
Page 46
www.ats-global.com
ATS International B.V. © 2012 The information in this document is the property of ATS International B.V. and may not be copied, or communicated to a third
party, or used, for any purpose other than that for which it is supplied without the express written consent of ATS International B.V.