iFan Twin/Single/Mini Box - Angus Air
iFan Twin/Single/Mini Box - Angus Air
iFan Twin/Single/Mini Box - Angus Air
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>iFan</strong> <strong>Single</strong><strong>Box</strong> Section 1.2<br />
• 125mm - 355mm diameter spigot sizes<br />
• Volume flow up to 0.55m 3 /s<br />
• Static pressures up to 450 Pa<br />
• Spigots with double lip neoprene seals<br />
as standard<br />
• Forward curved impellers<br />
• Acoustically lined box<br />
Sizes<br />
<strong>iFan</strong> Inline <strong>Single</strong> Fan<br />
<strong>iFan</strong> 125, 150, 200H, 250, 315, 355 ILS<br />
All sizes refer to circular inlet and outlet connections.<br />
Construction<br />
Casings are manufactured from pre-galvanised sheet steel and are carefully designed to provide a strong<br />
and rigid casing.<br />
<strong>iFan</strong> inline singlefan units have circular inlet and outlet spigots with a double-lip neoprene seal minimising<br />
leakage. The units are internally lined with acoustic grade rockwool with a facing to prevent the erosion of fibres.<br />
<strong>iFan</strong> inline singlefan and ICU1.5 are designed for duct mounting within the building.<br />
Motors<br />
The motor is mounted within the centrifugal impeller to form a compact unit, powered by a 220-240V/50Hz/1<br />
phase motor, giving silent and virtually vibration free running, operating at temperatures of up to a maximum<br />
of 40°C. All motors are manufactured in accordance with BS5000 and incorporate thermal overload protection,<br />
they are maintenance free, with sealed for life bearings offering an expected life L10 of 40,000 hours.<br />
Electrical Supply<br />
220 - 240V / 50Hz / 1φ.<br />
Temperature Range<br />
up to 40°C.<br />
Wiring/Controls<br />
• ICU display to assist in set up<br />
• Robust construction<br />
• Suitable for either horizontal or vertical<br />
(air up) mounting<br />
• Low sound levels at higher pressures<br />
• Fan operation up to 40°C<br />
• Intelligent Control Unit<br />
All units are speed controllable using the Fläkt Woods <strong>iFan</strong> Intelligent Control Unit (ICU1.5),<br />
connected via cable and plug.<br />
Section 1 - Demand Control Ventilation<br />
Servicing<br />
The top panel of each unit allows easy access for inspection. The fan assembly<br />
can also be easily removed for cleaning purposes.<br />
Mounting<br />
Suitable for both horizontal and vertical (air up) mounting only. The units can<br />
be inverted if bottom access is required. Mounting kit for ICU1.5 available,<br />
refer section 1.8.<br />
16