VMELT 171_e12_ad - Adhesives & Sealants by Evonik
VMELT 171_e12_ad - Adhesives & Sealants by Evonik
VMELT 171_e12_ad - Adhesives & Sealants by Evonik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Information<br />
Product Information<br />
VESTAMELT® <strong>171</strong><br />
High viscosity copolyamid<br />
polyamide hotmelt <strong>ad</strong>hesive<br />
VESTAMELT <strong>171</strong> is a high viscosity copolyamide<br />
hotmelt with excellent <strong>ad</strong>hesion.<br />
As an <strong>ad</strong>ditive to low viscous gr<strong>ad</strong>es it<br />
improves the resistance to strike back in<br />
pastes.<br />
VESTAMELT <strong>171</strong> is also suitable for<br />
manufacturing films.<br />
VESTAMELT <strong>171</strong> is supplied as granules in<br />
foil-laminated bags and powder in<br />
multilayer PE-laminated paper bags.<br />
The powder is supplied in following particle<br />
size:<br />
- P1 = 0 to 80 µm<br />
Fields of application:<br />
- meltprint<br />
- paste dot<br />
- <strong>ad</strong>hesive films<br />
- as an <strong>ad</strong>ditive in pastes<br />
VESTAMELT <strong>171</strong> is a non-hazardous substance<br />
and is not subjected to any particular<br />
safety regulations.<br />
For further information, please contact us at evonik-hp@evonik.com.<br />
VESTAMELT® = registered tr<strong>ad</strong>emark of the <strong>Evonik</strong> Degussa GmbH January 2012
Property<br />
Test method<br />
international<br />
national<br />
Unit<br />
VESTAMELT<br />
<strong>171</strong><br />
Melt flow rate (MFR)<br />
following<br />
following<br />
160°C/2.16kg<br />
Relative solution viscosity<br />
Melting point, optical<br />
ISO 1133/53735<br />
following<br />
R307/53727<br />
following<br />
ISO 3146<br />
DIN EN ISO 1133 g/10 min approx. 6<br />
following<br />
R307/53727 1.7<br />
following<br />
DIN EN ISO 3146 °C 136<br />
Melting characteristics on<br />
Kofler bar<br />
Tack point<br />
Melting point<br />
Kofler bar<br />
Kofler bar<br />
°C<br />
°C<br />
103<br />
128<br />
® = registered tr<strong>ad</strong>emark<br />
This information and all technical and other <strong>ad</strong>vice are based on <strong>Evonik</strong>’s present knowledge and experience. However, <strong>Evonik</strong> assumes no<br />
liability for such information or <strong>ad</strong>vice, including the extent to which such information or <strong>ad</strong>vice may relate to third party intellectual<br />
property rights. <strong>Evonik</strong> reserves the right to make any changes to information or <strong>ad</strong>vice at any time, without prior or subsequent notice.<br />
<strong>Evonik</strong> disclaims all representations and warranties, whether express or implied, and shall have no liability for, merchantability of the<br />
product or its fitness for a particular purpose (even if <strong>Evonik</strong> is aware of such purpose), or otherwise. <strong>Evonik</strong> shall not be responsible for<br />
consequential, indirect or incidental damages (including loss of profits) of any kind. It is the customer’s sole responsibility to arrange for<br />
inspection and testing of all products <strong>by</strong> qualified experts. Reference to tr<strong>ad</strong>e names used <strong>by</strong> other companies is neither a<br />
recommendation, nor an endorsement of the corresponding product, and does not imply that similar products could not be used.<br />
<strong>Evonik</strong> Industries AG High Performance Polymers 45764 Marl Germany<br />
Phone +49 2365 49-9878 E-mail evonik-hp@evonik.com<br />
www.vestamelt.com
Change language