dentsply tph 3 micro matrix restorative
dentsply tph 3 micro matrix restorative
dentsply tph 3 micro matrix restorative
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DENTSPLY TPH 3 MICRO MATRIX RESTORATIVE<br />
Chemwatch Material Safety Data Sheet CHEMWATCH 4645-40<br />
Issue Date: 26-Oct-2005 CD 2005/3 Page 4 of 14<br />
Section 6 - ACCIDENTAL RELEASE MEASURES<br />
- If contamination of drains or waterways occurs, advise emergency services.<br />
EMERGENCY EXPOSURE LIMITS<br />
Material Revised IDLH Revised IDLH<br />
Value (ppm) Value (mg/m3)<br />
Silica, amorphous 3,000<br />
Titanium dioxide 5,000<br />
EMERGENCY RESPONSE PLANNING GUIDELINES (ERPG)<br />
The maximum airborne concentration below which it is believed that nearly all<br />
individuals could be exposed for up to one hour WITHOUT experiencing or developing<br />
life-threatening health effects is:<br />
triethylene glycol dimethacrylate<br />
silica amorphous, fumed<br />
silica, dimethylsiloxane treated<br />
titanium dioxide<br />
500 mg/m³<br />
500 mg/m³<br />
500 mg/m³<br />
500 mg/m³<br />
irreversible or other serious effects or symptoms which could<br />
impair an individual's ability to take protective action is:<br />
triethylene glycol dimethacrylate<br />
50 mg/m³<br />
silica amorphous, fumed<br />
100 mg/m³<br />
silica, dimethylsiloxane treated<br />
125 mg/m³<br />
titanium dioxide<br />
15 mg/m³<br />
other than mild, transient adverse effects<br />
without perceiving a clearly defined odour is:<br />
triethylene glycol dimethacrylate<br />
silica amorphous, fumed<br />
silica, dimethylsiloxane treated<br />
titanium dioxide<br />
30 mg/m³<br />
6 mg/m³<br />
15 mg/m³<br />
15 mg/m³<br />
The threshold concentration below which most people.<br />
will experience no appreciable risk of health effects:<br />
triethylene glycol dimethacrylate<br />
10 mg/m³<br />
silica amorphous, fumed<br />
2 mg/m³<br />
silica, dimethylsiloxane treated<br />
6 mg/m³<br />
titanium dioxide<br />
15 mg/m³<br />
American Industrial Hygiene Association (AIHA)<br />
Ingredients considered according exceed the following cutoffs<br />
Very Toxic (T+) >= 0.1% Toxic (T) >= 3.0%<br />
R50 >= 0.25% Corrosive (C) >= 5.0%<br />
R51 >= 2.5%<br />
else >= 10%<br />
where percentage is percentage of ingredient found in the mixture<br />
Personal Protective Equipment advice is contained in Section 8 of the MSDS.<br />
Section 7 - HANDLING AND STORAGE<br />
PROCEDURE FOR HANDLING<br />
- Avoid all personal contact, including inhalation.<br />
continued...