27.02.2015 Views

dentsply tph 3 micro matrix restorative

dentsply tph 3 micro matrix restorative

dentsply tph 3 micro matrix restorative

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

DENTSPLY TPH 3 MICRO MATRIX RESTORATIVE<br />

Chemwatch Material Safety Data Sheet CHEMWATCH 4645-40<br />

Issue Date: 26-Oct-2005 CD 2005/3 Page 6 of 14<br />

Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION<br />

Standards<br />

Amorphous, Fume<br />

(thermally<br />

generated)<br />

(respirable<br />

dust) (g)<br />

Australian Exposure Titanium dioxide 10<br />

Standards<br />

No data available: Dentsply TPH 3 Micro Matrix Restorative as (CAS: 65997-17-3.) / (CAS: 65997-18-4) / (CAS: 2444<br />

No data available: soluble amorphous glass wool as (CAS: 65997-17-3)<br />

No data available: frits chemical as (CAS: 65997-18-4)<br />

No data available: 2,2-bis[4-(2-methacryloxy)ethoxy)phenyl]propane as (CAS: 24448-20-2)<br />

No data available: triethylene glycol dimethacrylate as (CAS: 109-16-0)<br />

No data available: silica amorphous, fumed as (CAS: 60842-32-2)<br />

No data available: silica, dimethylsiloxane treated as (CAS: 67762-90-7)<br />

Not available. Refer to individual constituents.<br />

EXPOSURE STANDARDS FOR MIXTURE<br />

"Worst Case" computer-aided prediction of spray/ mist or fume/ dust components<br />

and concentration:<br />

"Worst Case" computer-aided prediction of spray/ mist or fume/ dust components<br />

and concentration:<br />

Composite Exposure Standard for Mixture (TWA) :2.0784 mg/m³.<br />

"Worst Case" computer-aided prediction of spray/ mist or fume/ dust components<br />

and concentration:<br />

Composite Exposure Standard for Mixture (TWA) (mg/m³):<br />

Operations which produce a spray/mist or fume/dust, introduce particulates to<br />

the breathing zone.<br />

If the breathing zone concentration of ANY of the components listed below is<br />

exceeded, "Worst Case" considerations deem the individual to be overexposed.<br />

Component Breathing Zone ppm Breathing Zone mg/m³ Mixture Conc (%).<br />

Component Breathing Zone Mixture Conc<br />

(mg/m³) (%)<br />

soluble amorphous glass wool 1.9608 50.0<br />

silica amorphous, fumed 0.1176 3.0<br />

INGREDIENT DATA<br />

SOLUBLE AMORPHOUS GLASS WOOL:<br />

ES TWA: 0.5 respirable fibres per millilitre of air (f/mL) for synthetic<br />

mineral fibres SMF (MMMF); concentration to be determined in accordance<br />

with the NOH&S Commission's "Membrane Filter Method for the Estimation of<br />

Airborne Synthetic Fibres"<br />

ES TWA: 2 mg/m³ inspirable dust as determined in accordance with<br />

Australian Standard AS 3640<br />

TLV TWA: 1 f/cc A3 (respirable glass wool fibres, length >5um; aspect<br />

ratio >=3:1**)<br />

** - as determined by the membrane filter method at 400-450X magnification<br />

(4-mm objective) phase contrast illumination.<br />

CAUTION: This substance has been classified by the ACGIH as A3 Animal Carcinogen<br />

(at relatively high doses).<br />

FRITS CHEMICAL:<br />

The wide-ranging effects of antimony compounds have made it difficult to<br />

recommend an exposure standard which characterises the toxicology of these<br />

substances. One criteria, reflecting the irritant properties of antimony<br />

continued...

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!