BEARINGS - Superior Essex
BEARINGS - Superior Essex
BEARINGS - Superior Essex
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Phone: 800.774.4643 • Fax: 800.768.9782<br />
BALL BEARING INSTALLER KIT<br />
Installs ball bearings fast and easy without damage to seals or flanges. Sleeves are made of steel,<br />
heat treated and hardened for use with arbor press or mallet, admium plated for protection<br />
against rust, and knurled for easy handling. Sleeve made about .025” larger than bore of bearing,<br />
and passes easily over shaft, providing a perfectly lined installation. Outside diameter fits inner<br />
race of bearing. Long enough to use on standard NEMA shaft extension. Ranges from 200 Series<br />
ball bearings (10mm I.D.) to 209 Series (45mm I.D.) Part No. TBI-10 Set of 10 sleeves for bearings<br />
10 to 45mm bore.<br />
TBI-2010 6200/6300 TBI-2510 6205/6305<br />
TBI-2110 6201/6301 TBI-2610 6206/6306<br />
TBI-2210 6202/6302 TBI-2710 6207/6307<br />
TBI-2310 6203/6306 TBI-2810 6208/6308<br />
TBI-2410 6204/6304 TBI-2910 6209/6309<br />
BALL BEARING PULLER ADAPTERS<br />
Where bearings are recessed and cannot be held by the separator, a specially<br />
designed set of Puller Adapters has been engineered. The carefully machined highgrade<br />
steel adapters can be slipped on the bearing in seconds; the adapter ring is<br />
then set to contain the bearing. The Adapter, with the bearing enclosed, is set into<br />
the separator holder for efficient removal of the bearing. The Ball Bearing Puller<br />
Adapters are made in the following 6 sizes.<br />
Part No. TGP-202 Adapter fits all "202" series bearings, having 35mm diameter ie. 202-3202-6202.<br />
Part No. TGP-203 Adapter fits all “203” series bearings, having 40mm diameter ie. 203-3203-6203.<br />
Part No. TGP-204 Adapter fits all “204” series bearings, having 42mm diameter ie. 204-3204-6204.<br />
Part No. TGP-205 Adapter fits all “205” series bearings, having 52mm diameter ie. 205-3205-6205.<br />
Part No. TGP-305 Adapter fits all “305” series bearings, having 62mm diameter ie. 305-3305-6305.<br />
Part No. TGP-306 Adapter fits all “306” series bearings, having 72mm diameter ie. 306-3306-6306.<br />
STANLEY COMPO-CAST ® HAMMERS<br />
The most versatile, durable, all-purpose hammer available. As thorough as it is gentle. The entire<br />
exterior surface is solid molded urethane, virtually indestructable. Outlasts rawhide, nylon, rubber,<br />
brass or lead by 10 to 20 times. All models feature dead blow heads for sustained impact and<br />
maximum striking force. Wrap around grip with flanged butt. No Mark - No Spark.<br />
STANDARD MODELS<br />
Part Face Head LENGTH<br />
number Dia.(IN.) Length(IN.) (IN.) Weight<br />
TCH-OHD 1 1/2 3 1/8 10 l4 oz.<br />
TCH-lHD 1 3/4 3 3/4 11 1 1/2 lbs.<br />
TCH-2HD 2 4 1/4 12 3/4 2lbs.<br />
TCH-3HD 2 1/2 4 3/4 14 3lbs.<br />
TCH-4HD 2 3/4 5 1/4 16 4 lbs.<br />
SLIMLINE MODELS<br />
TCH-O-XHD 1 3 9 1/2 8 ozs.<br />
TCH-X02-HD 11/4 4 1/4 10 1/2 11/2 lbs.<br />
TCH-X03-HD 11/2 41/4 12 11/2 lbs.<br />
TCH-Xi-HD 13/4 5 1/4 13 2 lbs.<br />
SLEDGE MODELS<br />
TCH-4HD-1 2 3/4 7 20 7 lbs.<br />
TCH-12HD 3 1/2 8 30 l2 lbs.<br />
TCH-14HD 3 1/2 8 36 14 lbs.<br />
44<br />
All sales are subject to and governed by the <strong>Essex</strong> Group, Inc. Standard Terms and Conditions of Sale.