BEARINGS - Superior Essex

More documents

Recommendations

Info

Phone: 800.774.4643 • Fax: 800.768.9782 BALL BEARING INSTALLER KIT Installs ball bearings fast and easy without damage to seals or flanges. Sleeves are made of steel, heat treated and hardened for use with arbor press or mallet, admium plated for protection against rust, and knurled for easy handling. Sleeve made about .025” larger than bore of bearing, and passes easily over shaft, providing a perfectly lined installation. Outside diameter fits inner race of bearing. Long enough to use on standard NEMA shaft extension. Ranges from 200 Series ball bearings (10mm I.D.) to 209 Series (45mm I.D.) Part No. TBI-10 Set of 10 sleeves for bearings 10 to 45mm bore. TBI-2010 6200/6300 TBI-2510 6205/6305 TBI-2110 6201/6301 TBI-2610 6206/6306 TBI-2210 6202/6302 TBI-2710 6207/6307 TBI-2310 6203/6306 TBI-2810 6208/6308 TBI-2410 6204/6304 TBI-2910 6209/6309 BALL BEARING PULLER ADAPTERS Where bearings are recessed and cannot be held by the separator, a specially designed set of Puller Adapters has been engineered. The carefully machined highgrade steel adapters can be slipped on the bearing in seconds; the adapter ring is then set to contain the bearing. The Adapter, with the bearing enclosed, is set into the separator holder for efficient removal of the bearing. The Ball Bearing Puller Adapters are made in the following 6 sizes. Part No. TGP-202 Adapter fits all "202" series bearings, having 35mm diameter ie. 202-3202-6202. Part No. TGP-203 Adapter fits all “203” series bearings, having 40mm diameter ie. 203-3203-6203. Part No. TGP-204 Adapter fits all “204” series bearings, having 42mm diameter ie. 204-3204-6204. Part No. TGP-205 Adapter fits all “205” series bearings, having 52mm diameter ie. 205-3205-6205. Part No. TGP-305 Adapter fits all “305” series bearings, having 62mm diameter ie. 305-3305-6305. Part No. TGP-306 Adapter fits all “306” series bearings, having 72mm diameter ie. 306-3306-6306. STANLEY COMPO-CAST ® HAMMERS The most versatile, durable, all-purpose hammer available. As thorough as it is gentle. The entire exterior surface is solid molded urethane, virtually indestructable. Outlasts rawhide, nylon, rubber, brass or lead by 10 to 20 times. All models feature dead blow heads for sustained impact and maximum striking force. Wrap around grip with flanged butt. No Mark - No Spark. STANDARD MODELS Part Face Head LENGTH number Dia.(IN.) Length(IN.) (IN.) Weight TCH-OHD 1 1/2 3 1/8 10 l4 oz. TCH-lHD 1 3/4 3 3/4 11 1 1/2 lbs. TCH-2HD 2 4 1/4 12 3/4 2lbs. TCH-3HD 2 1/2 4 3/4 14 3lbs. TCH-4HD 2 3/4 5 1/4 16 4 lbs. SLIMLINE MODELS TCH-O-XHD 1 3 9 1/2 8 ozs. TCH-X02-HD 11/4 4 1/4 10 1/2 11/2 lbs. TCH-X03-HD 11/2 41/4 12 11/2 lbs. TCH-Xi-HD 13/4 5 1/4 13 2 lbs. SLEDGE MODELS TCH-4HD-1 2 3/4 7 20 7 lbs. TCH-12HD 3 1/2 8 30 l2 lbs. TCH-14HD 3 1/2 8 36 14 lbs. 44 All sales are subject to and governed by the <strong>Essex</strong> Group, Inc. Standard Terms and Conditions of Sale.
Phone: 800.774.4643 • Fax: 800.768.9782 BEARING HEATERS Linmast Induction Bearing Heaters The Linmast induction bearing heaters are the most innovative heaters to hit the market! Their superior design is more accurate, safer to use, more efficient, and more cost effective than most competitive brands. With six models to choose from, you can order yours today and discover the difference! FEATURES: • Audible alarm notification • Digital temperature readout • Automatic demagnetization • Extremely simple operation • Safe method of heating • Programmable temperature setting • Six different models to choose from to cover a full range of bearing sizes • Comes with heat resistant gloves & additional cross bars MODEL DESCRIPTION TLBH-45C Induction Bearing Heater 1KVA, 110V, 18 lbs. max, additional cross bar: 9/16" x 9/16" TLBH-70C Induction Bearing Heater 2.2KVA, 110V, 66 lbs. Max, 2 additional cross bars: 9/16"x9/16", 1"x1" TLBH-70C-220V Induction Bearing Heater 3.6KVA, 220V, 66 lbs. Max, 2 additional cross bars: 9/16"x9/16", 1"x1" TLBH-90C Induction Bearing Heater 3.6KVA, 220V, 132 lbs. Max, 2 additional cross bars: 13/16"x13/16", 1-3/16"x1-3/16" TLBH-90H Induction Bearing Heater 8.5KVA, 440V, 220 lbs. Max, 2 additional cross bars: 13/16"x13/16", 1-3/16"x1-3/16" TLBH-120C Induction Bearing Heater 14KVA, 440V, 440 lbs. Max, 2 additional cross bars: 1-9/16"x1-9/16", 2-3/8"x2-3/8" TLBH-120D Induction Bearing Heater 14KVA, 440V, 440 lbs. Max, additional cross bars N/A, twin-pole can heat 2 bearings at a time Reco Induction Bearing heater Part No. TRBH-805 Induction Bearing Heater. Includes set of 3 cross-bars listed in specs. ACCESSORIES: Part No. TRBH-1O Extra small bar used with 203 and 204 bearings size 1/2" x 1/2". Part No. TST-213 Tempilstik Temperature Rating Marker. Rated at 213ºF. Part No. TRBH-SC238 2-3/8" Raising Blocks. Cone Thermo Bearing Heaters Easy to use. Mark with Thermo Crayon. When crayon mark melts, slip bearing on shaft. Open, shielded and sealed bearings mounted without damage to lubricants. Safe, no danger of fire or explosion hazard. Heating time for small bearings is approximately two minutes, medium size five minutes, large bearings ten minutes or as required. SPECIFICATIONS: 110 volts AC, 725 watts. Weight 8 lbs. Height 10". Mounts any bearing or gear with 3/4" to 8" bore. Comes complete with six foot heavy duty cord and switch, plus Thermo Crayon. Constructed of aluminum for fast heat transfer. Also available in 240V AC. Part No. TBH-160 Model B Bearing Heater for bearings to 5 3/4" bore. Part No. TBH-170 Model C Heavy Duty Bearing Heater for bearings to 5 3/4" bore. Part No. TBH-190 Model Super D Bearing Heater with temperature control for bearings to 8" bore. All sales are subject to and governed by the <strong>Essex</strong> Group, Inc. Standard Terms and Conditions of Sale. 45
Page 1: BEARINGS BEARINGS Phone: 800.774.46
Page 4 and 5: Phone: 800.774.4643 • Fax: 800.76
Page 14 and 15: Your Link To Incredible Quality Wha
Page 52: Phone: 800.774.4643 • Fax: 800.76

BEARINGS - Superior Essex

Create successful ePaper yourself

Delete template?

Save as template?