Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pipe Marker Installation Instructions<br />
Pipe Marking Products<br />
How to Install Snap-On Pipe Markers<br />
1.Spring open desired pipe marker.<br />
2.Wrap marker around the pipe. The<br />
marker will completely encircle the<br />
pipe for 360° visibility. Be sure the<br />
directional flow arrows are pointed<br />
in the proper direction.<br />
3.Finish by peeling off the adhesive<br />
liner from the clear tape <strong>and</strong><br />
secure the tape to the marker.<br />
How to Install Strap-On Pipe Markers<br />
1.Thread tie over the edge <strong>and</strong> thru<br />
the hole of the marker. Proceed<br />
threading under the marker, thru<br />
the opposite hole, then over the<br />
edge of the marker.<br />
2.Place the marker against the pipe.<br />
Be sure the directional flow arrows<br />
are pointed in the proper direction.<br />
3.Secure strap snugly around the<br />
pipe, tension <strong>and</strong> cut the tie using<br />
P<strong>and</strong>uit recommended tool.<br />
How to Install Pressure Sensitive Pipe Markers<br />
1.Clean the pipe with an appropriate<br />
cleaner <strong>and</strong> allow to dry.<br />
2.Separate the pipe marker from the<br />
liner.<br />
3.Apply the marker to the<br />
pre-cleaned area of the pipe.<br />
78
Change language