Safety and Facility cat. - Digikey

Valve Tag Accessories
Valve Tag Accessories (cont.)
Beaded Chain
Part Number Description Material
Std.
Pkg.*
MCB4-C
Extremely f lexible 4.50" (114 mm) bead Solid Brass 100
MCN4-C
chain with locking link; Chain is #6,
1/8" (3.2 mm) bead diameter
Nickel Plated Steel 100
Order the number of chains required in multiples of Std. Pkg.
Computer Controlled Custom Marking Service
All Panduit Metal Products and PSL-11 High Security Anodized
Aluminum Locks* found on page 34 can be custom marked by one of
two computer controlled systems.
• Sharp, crisp high quality legends
• Sequential numbers for serialization
• Bar coding capability on selected colored tags. (Laser System Only)
• Computer controlled Embosser and Laser Marking Systems
• See page 37 for custom marking order form
• Contact factory for further details
Pipe Marking Products
*Anodized Aluminum Locks cannot be embossed
Marking Systems
Panduit offers a variety of marking systems to accommodate all of your identification needs. From low to high
volume marking, these systems provide versatility and convenience.
MEHT Embosser
• Embosses 0.19" (5 mm) characters onto rolls of stainless steel or
aluminum tape
• Kit includes hand operated embosser, roll of stainless steel and aluminum
tape, and carrying case
• Tool punches a single 0.19" (5 mm) diameter hole (for std. cross section
tie) or a series of holes for wider cross-section sizes
• Can be used with PAN-STEEL ties as a flag or a marker
Par t
Number
Description
Std.
Pkg.*
MEHT Tool Kit 1 Kit
META-X
0.50" x 16’ (13 mm x 5 m) aluminum
METS3-X 0.50" x 21’ (13 mm x 6 m) 316 stainless steel tape 10 Rolls
METS4-X 0.50" x 21’ (13 mm x 6 m) 430 stainless steel tape
*MEHT: Order the number of kits required
META-X, MET3S-X and METS4-X: Order the number of rolls required in multiples of Std. Pkg.
Most commonly used parts appear in BOLD.
81