GAGEMAKER CATALOG PRODUCT INFORMATION
GAGEMAKER CATALOG PRODUCT INFORMATION
GAGEMAKER CATALOG PRODUCT INFORMATION
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Prices subject to change without notice 09/08<br />
17<br />
PITCH DIAMETER CONTACT POINT ARMS (For gage on page 16)<br />
“SPA” contact point arms hold “SP” contact points for internal pitch diameter<br />
measurements.<br />
Model Description Range<br />
SPA-265 .265” Diameter 1” Long<br />
SPA-375 .375” Diameter 1.25” Long<br />
SPA-437 .437” Diameter 1.50” Long<br />
SPG-6000 w/<br />
Contact Points<br />
PITCH DIAMETER CONTACT POINTS (For gage on page 16)<br />
Gagemaker’s standard ball contact points are manufactured with spherical carbide contact<br />
balls. Standard contact diameters are held to tolerances of + .00005. “SP” contact points<br />
fi t “SPA” contact point arms only Contact sizes are matched closely to thread inspection<br />
wire sizes. These contact sizes are used in the TDWIN Thread Disk for Windows software<br />
program.<br />
Model<br />
SP-105<br />
SP-096<br />
SP-072<br />
SP-057<br />
SP-050<br />
SP-041<br />
SP-032<br />
UN<br />
Thread Pitch<br />
5 pitch<br />
6 - 7 pitch<br />
8 - 9 pitch<br />
10 pitch<br />
11.5 - 12 pitch<br />
13 - 16 pitch<br />
18 - 20 pitch<br />
Model<br />
SP-105T<br />
SP-090T<br />
SP-062T<br />
SP-050T<br />
SP-041T<br />
SP-032T<br />
ACME/STUB ACME<br />
Thread Pitch<br />
5 pitch<br />
6 pitch<br />
8 pitch<br />
10 pitch<br />
12 - 14 pitch<br />
16 pitch<br />
Contact Points Arms<br />
Model<br />
SP-105<br />
SP-096<br />
SP-072<br />
SP-057<br />
SP-041<br />
SP-032<br />
INTERNAL METRIC<br />
Thread Pitch<br />
4.5 - 4.75 mm<br />
4 - 4.25 mm<br />
3 - 3.5 mm<br />
2.5 mm<br />
1.5 - 2 mm<br />
1 - 1.25 mm<br />
PD Contact Points<br />
www.gagemaker.com<br />
P.O. Box 87709, Houston, Texas 77287-7709<br />
Phone: (713) 472-7360 Fax: (713) 472-7241