GAGEMAKER CATALOG PRODUCT INFORMATION
GAGEMAKER CATALOG PRODUCT INFORMATION
GAGEMAKER CATALOG PRODUCT INFORMATION
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Prices subject to change without notice 09/08<br />
45<br />
CALIBRATION & REPAIR SERVICES<br />
GAGES, STANDARDS, AND INSPECTION EQUIPMENT<br />
Gagemaker offers calibration and repair services for many of its products. Non-Gagemaker<br />
manufactured gages are quoted on an individual basis. Please consult the table below for<br />
basic information on our services. Any further inquiries about products serviced, general<br />
repair services, or any other question should be made to our Customer Service department.<br />
An evaluation charge of $100.00 is required to quote repairs. If repair work is to be undertaken,<br />
the evaluation charge will be credited to the fi nal balance of the completed repair work. All<br />
fi gures are in US Dollars ($).<br />
Model<br />
Gage Calibration Equipment<br />
TF-1F, TF-2R Setting<br />
Blocks<br />
Services Available<br />
Inspect fl atness, parallelism,<br />
and size<br />
Calibration<br />
Price ($)<br />
Repair<br />
Rate ($/hr)<br />
59.00 75.00<br />
TF-__T Taper Blocks Inspect taper and size 59.00 75.00<br />
TF-__RSC Taper Block Set Inspect taper and size 89.00 75.00<br />
TF-BX Setting Blocks Inspect angle and size 59.00 75.00<br />
TF-TP Calibration Fixture<br />
Inspect and calculate new<br />
constant<br />
79.00 75.00<br />
CG-1001 Bench Calibrator<br />
Gage<br />
Verify micrometer travel 89.00 75.00<br />
Thread Diameter Measurement Gage<br />
RG-7000, PG-6000<br />
Diameter Gages<br />
Large Diameter Measurement Gages<br />
MIC 360 Gage<br />
API Gages/Standards<br />
Verify function and check<br />
parallelism<br />
Verify wheel diameter and<br />
gage function<br />
89.00 75.00<br />
289.00 75.00<br />
Lead Gages<br />
Calibrate indicator and verify<br />
function<br />
39.00 75.00<br />
Lead Standards Inspect step/step per specification 43.00 75.00<br />
MRP Gages Inspect complete assembly 47.00 75.00<br />
MRP Standard Set<br />
Inspect rod lengths per<br />
specifi cations<br />
43.00 75.00<br />
Thread Height Standards<br />
Inspect groove depths per<br />
specifi cations<br />
34.00 75.00<br />
Profi le Gages<br />
Verify profi le with optical<br />
comparator<br />
34.00 -<br />
Miscellaneous Equipment<br />
Indicators Calibrate per specifi cation 39.00 75.00<br />
Thread Rolls Calibrate per specifi cation 59.00 -<br />
CMM Contract Inspection Per customer specifi cation 175.00 -<br />
***ALL indicators or gages requiring repair will be quoted prior to any work being<br />
commenced. A purchase order or written approval for the repair work must be<br />
submitted and received before any repairs will be undertaken.***<br />
CALIBRATION CERTIFICATES<br />
Certificate Type<br />
Standard Long Form Conformance Certificates – provided with all calibrations.<br />
Includes model number, serial number, required and actual measurements, traceability<br />
to NIST or other governing body, inspector’s signature, calibration and recalibration<br />
date. Profi le gages are issued certifi cates of compliance only.<br />
Special Long Form Certificates – includes any documentation other than that<br />
listed under the Standard Long Form Certifi cate<br />
Price<br />
-<br />
35.00<br />
www.gagemaker.com<br />
P.O. Box 87709, Houston, Texas 77287-7709<br />
Phone: (713) 472-7360 Fax: (713) 472-7241