GAGEMAKER CATALOG PRODUCT INFORMATION

Prices subject to change without notice 09/08
39
PREMIUM CONNECTION GAGES
ST-7001
Model Description Range
The ST-7001 measures variation in ring and plug gage standoff on rotary shouldered
connectors. The gage is supplied complete with setting standard.
ST-7001 Indicator Standoff Gage w/ Setting Standard .615” - .635”
STS-7001 Setting Standard Replacement, .625" width .6250”
The CamLock micrometers measure API weld fl ange thickness. Supplied with verifi cation
standard. (Replacement standards are available separately, please call for quotation.)
ST-7001 Setting
Standard
CL-1001 CamLock Micrometer- 25° 0” - 1”
CL-1002 CamLock Micrometer- 25° 1” - 2”
CL-1003 CamLock Micrometer- 25° 2” - 3”
CL-1004 CamLock Micrometer- 25° 3” - 4”
POWER SECTION GAGES
NEW!
Today in the oil fi eld industry, unique high-performance power sections require increasingly
accurate measurement tools for rotors and stators. Gagemaker has designed several new
gages to measure a rotor's major and minor diameters and a stator's minor diameters.
ROTOR MAJOR DIAMETER T-MIC
Due to high spirals on the lobes, conventional measurement gages cannot be used for measuring rotor
major diameters. Gagemaker developed the T-Micrometer (T-Mic) to measure a rotor’s major diameter.
The T-Mic spans across two lobes on one side of the centerline and uses a Mitutoyo micrometer thimble
on the other to make the diameter measurements. Instead of modifying an existing micrometer, Gagemaker
custom builds each T-Mic. Gagemaker's rugged design far exceeds all others on the market today.
Four 10-32 SHCS and industrial high sheer strength epoxies ensure a long life, as well as, maintain
accurate perpendicular-measuring surfaces.
Model Description Diameter Range
TM12-0-1 T-Mic for Stator with ½" wide x 12" long base 0" - 1"
TM12-1-2 T-Mic for Stator with ½" wide x 12" long base 1" - 2"
TM12-2-3 T-Mic for Stator with ½" wide x 12" long base 2" - 3"
TM12-3-4 T-Mic for Stator with ½" wide x 12" long base 3" - 4"
TM12-4-5 T-Mic for Stator with ½" wide x 12" long base 4" - 5"
TM12-5-6 T-Mic for Stator with ½" wide x 12" long base 5" - 6"
TM12-6-7 T-Mic for Stator with ½" wide x 12" long base 6" - 7"
TM18-0-1 T-Mic for Stator with ½" wide x 18" long base 0" - 1"
TM18-1-2 T-Mic for Stator with ½" wide x 18" long base 1" - 2"
TM18-2-3 T-Mic for Stator with ½" wide x 18" long base 2" - 3"
TM18-3-4 T-Mic for Stator with ½" wide x 18" long base 3" - 4"
TM18-4-5 T-Mic for Stator with ½" wide x 18" long base 4" - 5"
TM18-5-6 T-Mic for Stator with ½" wide x 18" long base 5" - 6"
TM18-6-7 T-Mic for Stator with ½" wide x 18" long base 6" - 7"
ROTOR MINOR DIAMETER MIC
Gagemaker’s minor diameter mic gage was designed to measure a rotor’s minor diameter. The spiral
lobes on the rotor produce a valley, or minor diameter. The depth of the minor diameter from the major
diameter requires a 1” travel indicator stem. The extend range, 0” - 6.”, allows the measurement of all
size rotors with only one gage. Ensuring the gage’s durability and long life, Gagemaker’s design uses
a heave duty indicator stem and bearing housing to withstand side loads.
Model Description Diameter Range
MM-0-6 Minor diameter micrometer 0" - 6"
CL-1002 w/
Verifi cation
Standard
TM12-0-1
TM18-0-1
MM-0-6
www.gagemaker.com
P.O. Box 87709, Houston, Texas 77287-7709
Phone: (713) 472-7360 Fax: (713) 472-7241