Industrial Product Guide - Nabic

COMPRESSION FITTINGS, VALVES & ACCESSORIES
Compression Fittings
Wade compression fittings consistently produce cost-effective,
reliable leak-tight joints. They can be found in general use
throughout the following industries: hydraulic, pneumatic,
automotive, locomotive, LPG, oil and gas, power generation,
air conditioning, heating and ventilation, and also for
applications where there is the need for the added safety
provided by an engineered fitting.
Fittings, depending on Ferule type, are suitable for use with
copper, brass, bundy, nylon, polythene and PVC coated tube
and are available in metric 4mm-18mm and imperial 1 /8"-1"
with thread options in API/NPT, BSPT, BSPP and metric forms.
SISTEM-P Push-In Fittings
Wade ‘SISTEM-P’ Push-In Fittings, designed for quick
coupling release of the tube, are manufactured using the
latest technology for use on a variety of tubing including
nylon and polyurethane. Utilising lightweight, high strength
materials, the fittings are nickel plated to protect against
corrosion, making them particularly suitable for food and
chemical applications.
Special oil resistant, nitrile rubber O-Ring seals are used for
prolonged life, and create a ‘bubble tight’ seal which is
particularly suitable for low pressure circuits. Once the tube
is inserted into the fitting, it is automatically sealed and
locked in position with a unique security grip.
Nickel Plated Brass BSP Fittings
A comprehensive range of male and female adaptors
with both BSP parallel and taper threads and a maximum
pressure rating of 60 bar.
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or
liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
152 Technical Helpline: 01744 451616
E: wadesales@cranebsu.com W: www.wadefittings.com